Ford Probe MOT Results
Registered in 199669.7% pass rate
from 89 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Ford Probe is unusually good or bad.
-
12% fail on
Body, chassis, structure
- 4.5% fail on Exhaust system
-
4.5% fail on
Transmission
-
3.4% fail on
Drive shafts
- 3.4% fail on Joints
-
1.1% fail on
Prop shafts
- 1.1% fail on Joints
-
3.4% fail on
Drive shafts
-
2.2% fail on
Integral vehicle structure
- 2.2% fail on Integral vehicle structure condition
-
2.2% fail on
Chassis
- 2.2% fail on Chassis condition
-
11% fail on
Lamps, reflectors and electrical equipment
-
6.7% fail on
Electrical equipment
(4 times worse than other 1996 cars)
- 3.4% fail on Battery(ies) (5 times worse than other 1996 cars)
- 2.2% fail on Horn
- 1.1% fail on Electrical wiring
-
4.5% fail on
Headlamp aim
- 4.5% fail on Headlamp aim
-
3.4% fail on
Headlamps
- 1.1% fail on Headlamp
- 1.1% fail on Dipswitch
- 1.1% fail on Headlamp levelling device
-
6.7% fail on
Electrical equipment
(4 times worse than other 1996 cars)
-
9.0% fail on
Suspension
-
4.5% fail on
Anti-roll bars
- 2.2% fail on Ball joint (12 times worse than other 1996 cars)
- 2.2% fail on Linkage ball joint dust cover (6 times worse than other 1996 cars)
- 4.5% fail on Component mounting prescribed areas
-
2.2% fail on
Springs
-
2.2% fail on
Coil springs
- 1.1% fail on Coil spring
- 1.1% fail on Mounting
-
2.2% fail on
Coil springs
-
1.1% fail on
Macpherson strut
- 1.1% fail on Attachment bracket and mounting
-
1.1% fail on
Suspension arms
- 1.1% fail on Ball joint dust cover
-
4.5% fail on
Anti-roll bars
-
7.9% fail on
Brakes
-
5.6% fail on
Brake performance
-
3.4% fail on
Service Brake Efficiency (sp)
-
3.4% fail on
Rbt (sp)
- 2.2% fail on Service brake imbalance
- 1.1% fail on Service brake performance
-
3.4% fail on
Rbt (sp)
-
2.2% fail on
Service brake performance
-
2.2% fail on
Rbt
- 1.1% fail on Service brake performance
- 1.1% fail on Service brake imbalance
-
2.2% fail on
Rbt
-
3.4% fail on
Service Brake Efficiency (sp)
- 1.1% fail on Rigid brake pipes
- 1.1% fail on Flexible brake hoses
-
1.1% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.1% fail on Hydraulic brake callipers
-
1.1% fail on
Mechanical brake components
-
1.1% fail on
Brake linings and pads
- 1.1% fail on Brake pads
-
1.1% fail on
Brake linings and pads
-
1.1% fail on
ABS / EBS / ESC
- 1.1% fail on Anti-lock braking system
-
5.6% fail on
Brake performance
-
7.9% fail on
Noise, emissions and leaks
-
4.5% fail on
Exhaust emissions
-
4.5% fail on
Spark ignition
- 2.2% fail on Catalyst emissions
-
1.1% fail on
Emission control equipment
- 1.1% fail on Catalytic converter
- 1.1% fail on Malfunction indicator lamp
- 1.1% fail on Emissions not tested
-
4.5% fail on
Spark ignition
-
3.4% fail on
Fluid leaks
(3 times worse than other 1996 cars)
- 3.4% fail on Engine oil leaks (4 times worse than other 1996 cars)
-
4.5% fail on
Exhaust emissions
-
5.6% fail on
Seat belts and supplementary restraint systems
- 3.4% fail on SRS malfunction indicator lamp (4 times worse than other 1996 cars)
-
2.2% fail on
Seat belts
- 2.2% fail on Prescribed areas
-
4.5% fail on
Visibility
- 2.2% fail on Wipers
-
1.1% fail on
Condition of glass
- 1.1% fail on Windscreen
-
1.1% fail on
View to rear
- 1.1% fail on Mirrors
- 1.1% fail on Washers
-
2.2% fail on
Tyres
- 2.2% fail on Condition