Ford Granada MOT Results
Registered in 199358.7% pass rate
from 75 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Ford Granada is unusually good or bad.
-
15% fail on
Noise, emissions and leaks
-
15% fail on
Exhaust emissions
-
13% fail on
Spark ignition
- 9.3% fail on Catalyst emissions
- 2.7% fail on Emissions not tested
- 1.3% fail on Non catalyst emissions
-
2.7% fail on
Compression ignition
- 1.3% fail on Pre 01/07/2008 Non turbo
- 1.3% fail on Emissions not tested
-
13% fail on
Spark ignition
-
15% fail on
Exhaust emissions
-
13% fail on
Suspension
- 8.0% fail on Component mounting prescribed areas
-
5.3% fail on
Suspension arms
- 1.3% fail on Suspension arm
- 1.3% fail on Pins and bushes
- 1.3% fail on Ball joint
- 1.3% fail on Ball joint dust cover
-
4.0% fail on
Springs
-
2.7% fail on
Coil springs
- 1.3% fail on Coil spring
- 1.3% fail on Mounting
- 1.3% fail on Spring mounting prescribed areas
-
2.7% fail on
Coil springs
- 1.3% fail on Shock absorbers
-
1.3% fail on
Sub-frames
- 1.3% fail on Sub-frame mounting prescribed areas
-
13% fail on
Body, chassis, structure
- 6.7% fail on Exhaust system
-
5.3% fail on
Transmission
-
4.0% fail on
Drive shafts
- 4.0% fail on Joints
-
1.3% fail on
Prop shafts
- 1.3% fail on Joints
-
4.0% fail on
Drive shafts
-
1.3% fail on
Integral vehicle structure
- 1.3% fail on Integral vehicle structure condition
-
1.3% fail on
Fuel system
- 1.3% fail on Fuel cap/sealing device
-
9.3% fail on
Seat belts and supplementary restraint systems
(2 times worse than other 1993 cars)
-
9.3% fail on
Seat belts
(2 times worse than other 1993 cars)
- 8.0% fail on Prescribed areas (2 times worse than other 1993 cars)
- 1.3% fail on Condition
-
9.3% fail on
Seat belts
(2 times worse than other 1993 cars)
-
8.0% fail on
Brakes
- 4.0% fail on Rigid brake pipes
-
2.7% fail on
Mechanical brake components
-
2.7% fail on
Brake linings and pads
- 2.7% fail on Brake pads
-
2.7% fail on
Brake linings and pads
-
2.7% fail on
Brake performance
-
2.7% fail on
Service brake performance
-
2.7% fail on
Rbt
- 2.7% fail on Service brake performance
-
2.7% fail on
Rbt
-
1.3% fail on
Service Brake Efficiency (sp)
-
1.3% fail on
Rbt (sp)
- 1.3% fail on Service brake imbalance
-
1.3% fail on
Rbt (sp)
-
1.3% fail on
Parking brake efficiency (sp)
- 1.3% fail on Rbt (sp)
-
2.7% fail on
Service brake performance
-
6.7% fail on
Lamps, reflectors and electrical equipment
-
2.7% fail on
Headlamps
- 2.7% fail on Headlamp
-
2.7% fail on
Headlamp aim
- 2.7% fail on Headlamp aim
-
2.7% fail on
Electrical equipment
- 1.3% fail on Battery(ies)
- 1.3% fail on Horn
- 1.3% fail on Registration plate lamp(s)
-
2.7% fail on
Headlamps
-
4.0% fail on
Visibility
- 4.0% fail on Washers
-
2.7% fail on
Steering
-
1.3% fail on
Steering gear
- 1.3% fail on Steering rack
-
1.3% fail on
Power steering
- 1.3% fail on Other components
- 1.3% fail on Steering column
-
1.3% fail on
Steering gear
-
2.7% fail on
Tyres
- 1.3% fail on Condition
- 1.3% fail on Tread depth
-
1.3% fail on
Identification of the vehicle
- 1.3% fail on Registration plates
-
1.3% fail on
Speedometer and speed limiter
- 1.3% fail on Speedometer