Ford Granada MOT Results
Registered in 199272.0% pass rate
from 50 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Ford Granada is unusually good or bad.
-
12% fail on
Lamps, reflectors and electrical equipment
-
4.0% fail on
Direction indicators
-
4.0% fail on
Flashing type
- 2.0% fail on Individual direction indicators
- 2.0% fail on Side repeaters
-
4.0% fail on
Flashing type
-
2.0% fail on
Headlamps
- 2.0% fail on Headlamp
-
2.0% fail on
Headlamp aim
- 2.0% fail on Headlamp aim
- 2.0% fail on Stop lamp
-
2.0% fail on
Front and rear fog lamps
-
2.0% fail on
Rear fog lamp
- 2.0% fail on Rear fog lamp
-
2.0% fail on
Rear fog lamp
-
4.0% fail on
Direction indicators
-
8.0% fail on
Body, chassis, structure
-
4.0% fail on
Transmission
-
4.0% fail on
Drive shafts
- 4.0% fail on Joints
-
4.0% fail on
Drive shafts
-
2.0% fail on
Chassis
- 2.0% fail on Chassis condition
- 2.0% fail on Exhaust system
-
4.0% fail on
Transmission
-
4.0% fail on
Brakes
- 2.0% fail on Rigid brake pipes
-
2.0% fail on
Mechanical brake components
-
2.0% fail on
Brake linings and pads
- 2.0% fail on Brake pads
-
2.0% fail on
Brake linings and pads
-
2.0% fail on
Brake performance
-
2.0% fail on
Service Brake Efficiency (sp)
-
2.0% fail on
Rbt (sp)
- 2.0% fail on Service brake performance
- 2.0% fail on Service brake imbalance
-
2.0% fail on
Rbt (sp)
-
2.0% fail on
Service Brake Efficiency (sp)
-
4.0% fail on
Steering
- 4.0% fail on Steering column (32 times worse than other 1992 cars)
-
4.0% fail on
Visibility
- 4.0% fail on Wipers
-
4.0% fail on
Noise, emissions and leaks
-
2.0% fail on
Exhaust emissions
-
2.0% fail on
Spark ignition
- 2.0% fail on Emissions not tested
-
2.0% fail on
Spark ignition
-
2.0% fail on
Fluid leaks
- 2.0% fail on Hydraulic fluid leaks
-
2.0% fail on
Exhaust emissions
-
2.0% fail on
Identification of the vehicle
- 2.0% fail on Registration plates
-
2.0% fail on
Suspension
-
2.0% fail on
Suspension arms
- 2.0% fail on Pins and bushes
- 2.0% fail on Component mounting prescribed areas
-
2.0% fail on
Suspension arms
-
2.0% fail on
Seat belts and supplementary restraint systems
-
2.0% fail on
Seat belts
- 2.0% fail on Prescribed areas
-
2.0% fail on
Seat belts