Ford Granada MOT Results
Registered in 198582.7% pass rate
from 133 tests in 2021
(40% better than other 1985 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1985 cars and highlighted areas where the Ford Granada is unusually good or bad.
-
9.0% fail on
Lamps, reflectors and electrical equipment
-
3.8% fail on
Headlamp aim
- 3.8% fail on Headlamp aim
-
2.3% fail on
Electrical equipment
- 1.5% fail on Horn
- 0.75% fail on Battery(ies)
-
1.5% fail on
Headlamps
- 1.5% fail on Headlamp
-
1.5% fail on
Front and rear fog lamps
-
1.5% fail on
Rear fog lamp
- 0.75% fail on Rear fog lamp
- 0.75% fail on Switch
-
1.5% fail on
Rear fog lamp
- 0.75% fail on Stop lamp
-
0.75% fail on
Direction indicators
-
0.75% fail on
Flashing type
- 0.75% fail on Individual direction indicators
-
0.75% fail on
Flashing type
-
3.8% fail on
Headlamp aim
-
6.8% fail on
Body, chassis, structure
-
2.3% fail on
Transmission
-
1.5% fail on
Prop shafts
- 1.5% fail on Flexible couplings (26 times worse than other 1985 cars)
-
0.75% fail on
Drive shafts
- 0.75% fail on Joints
-
1.5% fail on
Prop shafts
-
1.5% fail on
Integral vehicle structure
- 1.5% fail on Integral vehicle structure condition
- 1.5% fail on Exhaust system
-
1.5% fail on
Fuel system
- 1.5% fail on Tank (10 times worse than other 1985 cars)
-
1.5% fail on
Seats
- 1.5% fail on Driver's seat
-
0.75% fail on
Chassis
- 0.75% fail on Chassis condition
- 0.75% fail on Floor
-
2.3% fail on
Transmission
-
6.0% fail on
Brakes
-
3.8% fail on
Brake performance
-
1.5% fail on
Service brake performance
-
0.75% fail on
Rbt
- 0.75% fail on Service brake performance
-
0.75% fail on
Plate brake tester
- 0.75% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.75% fail on
Rbt
-
1.5% fail on
Parking brake efficiency (sp)
- 1.5% fail on Rbt (sp)
-
0.75% fail on
Service Brake Efficiency (sp)
-
0.75% fail on
Rbt (sp)
- 0.75% fail on Service brake imbalance
-
0.75% fail on
Rbt (sp)
-
0.75% fail on
Parking brake performance
-
0.75% fail on
Rbt
- 0.75% fail on Parking brake performance
-
0.75% fail on
Rbt
-
1.5% fail on
Service brake performance
- 0.75% fail on Rigid brake pipes
- 0.75% fail on Flexible brake hoses
-
0.75% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.75% fail on Hydraulic brake cylinder
-
0.75% fail on
Mechanical brake components
-
0.75% fail on
Brake linings and pads
- 0.75% fail on Brake pads
-
0.75% fail on
Brake linings and pads
-
3.8% fail on
Brake performance
-
6.0% fail on
Suspension
- 2.3% fail on Component mounting prescribed areas
-
1.5% fail on
Suspension arms
- 1.5% fail on Ball joint dust cover
- 0.75% fail on Wheel bearings
-
0.75% fail on
Springs
-
0.75% fail on
Coil springs
- 0.75% fail on Coil spring
-
0.75% fail on
Coil springs
-
0.75% fail on
Other suspension component
- 0.75% fail on Pins and bushes
-
3.8% fail on
Visibility
- 2.3% fail on Washers
- 0.75% fail on Driver's view
- 0.75% fail on Wipers
-
3.0% fail on
Noise, emissions and leaks
-
3.0% fail on
Exhaust emissions
-
3.0% fail on
Spark ignition
- 3.0% fail on Non catalyst emissions
- 0.75% fail on Catalyst emissions
-
3.0% fail on
Spark ignition
-
3.0% fail on
Exhaust emissions
-
2.3% fail on
Steering
-
0.75% fail on
Steering linkage components
- 0.75% fail on Track rod end
-
0.75% fail on
Power steering
- 0.75% fail on Other components
-
0.75% fail on
Steering play
- 0.75% fail on Steering rack
-
0.75% fail on
Steering linkage components
-
2.3% fail on
Seat belts and supplementary restraint systems
-
2.3% fail on
Seat belts
- 1.5% fail on Prescribed areas
- 0.75% fail on Requirements
-
2.3% fail on
Seat belts
-
0.75% fail on
Identification of the vehicle
- 0.75% fail on Registration plates
-
0.75% fail on
Road Wheels
- 0.75% fail on Attachment
-
0.75% fail on
Tyres
- 0.75% fail on Tread depth