Ford Capri MOT Results
Registered in 198280.1% pass rate
from 151 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1982 cars and highlighted areas where the Ford Capri is unusually good or bad.
-
9.3% fail on
Lamps, reflectors and electrical equipment
-
3.3% fail on
Headlamps
- 3.3% fail on Headlamp
-
2.0% fail on
Headlamp aim
- 2.0% fail on Headlamp aim
-
2.0% fail on
Direction indicators
-
2.0% fail on
Flashing type
- 2.0% fail on All direction indicators
-
2.0% fail on
Flashing type
- 1.3% fail on Stop lamp
- 1.3% fail on Registration plate lamp(s)
-
1.3% fail on
Electrical equipment
- 0.66% fail on Battery(ies)
- 0.66% fail on Horn
-
0.66% fail on
Front and rear fog lamps
-
0.66% fail on
Rear fog lamp
- 0.66% fail on Rear fog lamp
-
0.66% fail on
Rear fog lamp
-
0.66% fail on
Mandatory tell-tales
- 0.66% fail on Rear fog lamp tell-tale
-
3.3% fail on
Headlamps
-
8.6% fail on
Visibility
- 6.6% fail on Washers
- 2.6% fail on Wipers
-
7.3% fail on
Suspension
- 3.3% fail on Component mounting prescribed areas
- 2.6% fail on Wheel bearings
-
1.3% fail on
Anti-roll bars
- 1.3% fail on Pins and bushes (6 times worse than other 1982 cars)
-
0.66% fail on
Suspension arms
- 0.66% fail on Pins and bushes
-
6.0% fail on
Brakes
-
5.3% fail on
Brake performance
-
3.3% fail on
Service brake performance
-
3.3% fail on
Rbt
- 2.6% fail on Service brake performance
- 0.66% fail on Service brake imbalance
-
3.3% fail on
Rbt
-
2.0% fail on
Service Brake Efficiency (sp)
-
2.0% fail on
Rbt (sp)
- 2.0% fail on Service brake imbalance
-
2.0% fail on
Rbt (sp)
- 0.66% fail on Brake performance not tested
-
0.66% fail on
Parking brake efficiency (sp)
- 0.66% fail on Decelerometer (sp)
-
3.3% fail on
Service brake performance
- 1.3% fail on Rigid brake pipes
-
0.66% fail on
Service brake pedal or hand lever
- 0.66% fail on Pedal
-
0.66% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.66% fail on Hydraulic brake cylinder
-
0.66% fail on
Mechanical brake components
-
0.66% fail on
Brake cables, rods, levers and linkages
- 0.66% fail on Pivot
-
0.66% fail on
Brake cables, rods, levers and linkages
-
5.3% fail on
Brake performance
-
4.6% fail on
Body, chassis, structure
-
1.3% fail on
Chassis
- 1.3% fail on Chassis condition
-
1.3% fail on
Seats
- 1.3% fail on Passenger's seat
-
0.66% fail on
Integral vehicle structure
- 0.66% fail on Integral vehicle structure condition
- 0.66% fail on Exhaust system
-
0.66% fail on
Fuel system
- 0.66% fail on Hose
-
0.66% fail on
Doors
-
0.66% fail on
Front passenger's door
- 0.66% fail on Door condition
-
0.66% fail on
Front passenger's door
-
1.3% fail on
Chassis
-
3.3% fail on
Noise, emissions and leaks
-
3.3% fail on
Exhaust emissions
-
3.3% fail on
Spark ignition
- 3.3% fail on Non catalyst emissions
-
3.3% fail on
Spark ignition
-
3.3% fail on
Exhaust emissions
-
2.0% fail on
Steering
-
2.0% fail on
Steering gear
- 2.0% fail on Steering rack
-
0.66% fail on
Steering linkage components
- 0.66% fail on Track rod end
- 0.66% fail on Locking devices
-
2.0% fail on
Steering gear
-
0.66% fail on
Seat belts and supplementary restraint systems
-
0.66% fail on
Seat belts
- 0.66% fail on Prescribed areas
-
0.66% fail on
Seat belts
-
0.66% fail on
Tyres
- 0.66% fail on Size/type