FIAT X1/9 MOT Results
Registered in 198970.7% pass rate
from 58 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1989 cars and highlighted areas where the FIAT X1/9 is unusually good or bad.
-
19% fail on
Lamps, reflectors and electrical equipment
-
6.9% fail on
Headlamps
- 6.9% fail on Headlamp
-
5.2% fail on
Headlamp aim
- 5.2% fail on Headlamp aim
-
5.2% fail on
Direction indicators
-
5.2% fail on
Flashing type
- 3.4% fail on Side repeaters
- 1.7% fail on All direction indicators
-
5.2% fail on
Flashing type
-
5.2% fail on
Front and rear fog lamps
-
5.2% fail on
Rear fog lamp
- 5.2% fail on Rear fog lamp
-
5.2% fail on
Rear fog lamp
- 3.4% fail on Stop lamp
-
3.4% fail on
Electrical equipment
- 3.4% fail on Horn
- 1.7% fail on Registration plate lamp(s)
-
6.9% fail on
Headlamps
-
14% fail on
Visibility
- 8.6% fail on Wipers
- 5.2% fail on Washers
-
10% fail on
Brakes
-
8.6% fail on
Brake performance
-
6.9% fail on
Parking brake efficiency (sp)
- 6.9% fail on Rbt (sp)
-
3.4% fail on
Service brake performance
-
3.4% fail on
Rbt
- 1.7% fail on Service brake performance
- 1.7% fail on Service brake imbalance
-
3.4% fail on
Rbt
-
1.7% fail on
Service Brake Efficiency (sp)
-
1.7% fail on
Rbt (sp)
- 1.7% fail on Service brake performance
-
1.7% fail on
Rbt (sp)
-
6.9% fail on
Parking brake efficiency (sp)
-
1.7% fail on
Service brake pedal or hand lever
- 1.7% fail on Hand lever
- 1.7% fail on Flexible brake hoses
-
8.6% fail on
Brake performance
-
8.6% fail on
Noise, emissions and leaks
-
8.6% fail on
Exhaust emissions
-
8.6% fail on
Spark ignition
- 6.9% fail on Non catalyst emissions
- 1.7% fail on Emissions not tested
-
1.7% fail on
Compression ignition
- 1.7% fail on Pre 01/07/2008 Non turbo
-
8.6% fail on
Spark ignition
-
8.6% fail on
Exhaust emissions
-
5.2% fail on
Suspension
-
3.4% fail on
Suspension arms
- 1.7% fail on Pins and bushes
- 1.7% fail on Ball joint dust cover
- 1.7% fail on Wheel bearings
-
1.7% fail on
Other suspension component
- 1.7% fail on Other suspension component
- 1.7% fail on Component mounting prescribed areas
-
3.4% fail on
Suspension arms
-
1.7% fail on
Identification of the vehicle
- 1.7% fail on Registration plates
-
1.7% fail on
Steering
-
1.7% fail on
Steering linkage components
- 1.7% fail on Track rod end
-
1.7% fail on
Steering linkage components
-
1.7% fail on
Body, chassis, structure
-
1.7% fail on
Fuel system
- 1.7% fail on Pipe
-
1.7% fail on
Fuel system