FIAT Qubo MOT Results

Registered in 2016
86.4% pass rate
from 176 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2016 cars and highlighted areas where the FIAT Qubo is unusually good or bad.

  • 3.4% fail on Visibility
    • 3.4% fail on Wipers
  • 2.8% fail on Suspension (3 times worse than other 2016 cars)
    • 1.1% fail on Springs (6 times worse than other 2016 cars)
      • 1.1% fail on Coil springs (6 times worse than other 2016 cars)
        • 1.1% fail on Coil spring (6 times worse than other 2016 cars)
    • 0.57% fail on Shock absorbers
    • 0.57% fail on Macpherson strut
      • 0.57% fail on Pins and bushes
    • 0.57% fail on Anti-roll bars
      • 0.57% fail on Linkage ball joints
  • 2.3% fail on Lamps, reflectors and electrical equipment
    • 1.7% fail on Headlamp aim
      • 1.7% fail on Headlamp aim
    • 0.57% fail on Registration plate lamp(s)
  • 2.3% fail on Tyres
    • 1.1% fail on Condition
    • 1.1% fail on Tread depth
  • 1.7% fail on Brakes
    • 1.1% fail on Mechanical brake components
      • 1.1% fail on Brake linings and pads
        • 1.1% fail on Brake pads
    • 0.57% fail on Parking brake control
      • 0.57% fail on Lever
  • 1.1% fail on Noise, emissions and leaks
    • 0.57% fail on Exhaust emissions
      • 0.57% fail on Compression ignition
        • 0.57% fail on On or after 01/07/2008
    • 0.57% fail on Fluid leaks
      • 0.57% fail on Hydraulic fluid leaks
  • 0.57% fail on Steering
    • 0.57% fail on Steering play
      • 0.57% fail on Steering rack
  • 0.57% fail on Body, chassis, structure
    • 0.57% fail on Exhaust system
  • 0.57% fail on Seat belts and supplementary restraint systems
    • 0.57% fail on Seat belts
      • 0.57% fail on Condition

Search Good Garages