FIAT Panda MOT Results
Registered in 201371.7% pass rate
from 7,739 tests in 2021
Pass rate by mileage
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 cars and highlighted areas where the FIAT Panda is unusually good or bad.
-
7.9% fail on
Lamps, reflectors and electrical equipment
- 2.6% fail on Stop lamp (40% worse than other 2013 cars)
- 2.4% fail on Registration plate lamp(s) (110% worse than other 2013 cars)
-
2.2% fail on
Headlamp aim
- 2.1% fail on Headlamp aim
- 0.078% fail on Headlamp aim not tested (63% better than other 2013 cars)
-
0.81% fail on
Headlamps
(61% better than other 2013 cars)
- 0.81% fail on Headlamp (58% better than other 2013 cars)
-
0.25% fail on
Reversing lamps
- 0.25% fail on Reversing lamps
-
0.21% fail on
Front and rear fog lamps
-
0.21% fail on
Rear fog lamp
- 0.21% fail on Rear fog lamp
-
0.21% fail on
Rear fog lamp
-
0.12% fail on
Direction indicators
(87% better than other 2013 cars)
-
0.12% fail on
Flashing type
(87% better than other 2013 cars)
- 0.065% fail on Individual direction indicators (83% better than other 2013 cars)
- 0.052% fail on Side repeaters (89% better than other 2013 cars)
-
0.12% fail on
Flashing type
(87% better than other 2013 cars)
-
0.12% fail on
Electrical equipment
- 0.078% fail on Battery(ies)
- 0.039% fail on Horn
-
0.039% fail on
Position lamps
- 0.039% fail on Position lamp
- 0.013% fail on Rear reflectors
-
7.8% fail on
Suspension
-
4.3% fail on
Springs
(20% worse than other 2013 cars)
-
4.3% fail on
Coil springs
(20% worse than other 2013 cars)
- 4.3% fail on Coil spring (20% worse than other 2013 cars)
-
4.3% fail on
Coil springs
(20% worse than other 2013 cars)
-
2.7% fail on
Suspension arms
- 1.4% fail on Pins and bushes (53% worse than other 2013 cars)
- 1.2% fail on Ball joint
- 0.21% fail on Ball joint dust cover
- 0.54% fail on Shock absorbers
-
0.36% fail on
Anti-roll bars
(56% better than other 2013 cars)
- 0.14% fail on Linkage ball joints
- 0.10% fail on Ball joint
- 0.052% fail on Linkage ball joint dust cover (79% better than other 2013 cars)
- 0.039% fail on Ball joint dust cover
- 0.013% fail on Linkage
- 0.013% fail on Linkage attachment bracket and mounting
- 0.27% fail on Wheel bearings
-
0.090% fail on
Other suspension component
- 0.052% fail on Ball joint
- 0.039% fail on Pins and bushes
-
0.026% fail on
Macpherson strut
- 0.013% fail on Attachment bracket and mounting
- 0.013% fail on Pins and bushes
-
0.026% fail on
Sub-frames
- 0.013% fail on Sub-frame
- 0.013% fail on Attachment bracket and mounting
-
0.013% fail on
Axles
- 0.013% fail on Swivel pins and bushes
-
0.013% fail on
Suspension rods
- 0.013% fail on Suspension rod
-
4.3% fail on
Springs
(20% worse than other 2013 cars)
-
5.1% fail on
Visibility
(22% worse than other 2013 cars)
- 3.6% fail on Wipers (64% worse than other 2013 cars)
- 1.6% fail on Washers
-
0.090% fail on
View to rear
- 0.090% fail on Mirrors
-
0.052% fail on
Condition of glass
- 0.052% fail on Windscreen
- 0.013% fail on Driver's view
- 0.013% fail on Bonnet
-
4.5% fail on
Brakes
-
2.5% fail on
Mechanical brake components
-
1.3% fail on
Brake discs and drums
(54% worse than other 2013 cars)
- 1.3% fail on Brake discs (53% worse than other 2013 cars)
- 0.013% fail on Brake drums
-
1.1% fail on
Brake linings and pads
(46% better than other 2013 cars)
- 1.1% fail on Brake pads (46% better than other 2013 cars)
- 0.013% fail on Brake linings
-
0.37% fail on
Brake cables, rods, levers and linkages
(6 times worse than other 2013 cars)
- 0.37% fail on Cable (10 times worse than other 2013 cars)
-
1.3% fail on
Brake discs and drums
(54% worse than other 2013 cars)
-
2.3% fail on
Brake performance
-
1.3% fail on
Parking brake efficiency (sp)
(76% worse than other 2013 cars)
- 0.96% fail on Rbt (sp) (36% worse than other 2013 cars)
- 0.31% fail on Decelerometer (sp) (12 times worse than other 2013 cars)
- 0.013% fail on Plate brake tester (sp)
-
0.89% fail on
Service brake performance
-
0.88% fail on
Rbt
- 0.70% fail on Service brake performance
- 0.22% fail on Service brake imbalance
-
0.013% fail on
Plate brake tester
- 0.013% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.88% fail on
Rbt
-
0.27% fail on
Parking brake performance
-
0.25% fail on
Rbt
- 0.22% fail on Parking brake performance
- 0.013% fail on Parking (secondary brake performance)
- 0.013% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.013% fail on
Decelerometer
- 0.013% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.013% fail on
Plate brake tester
- 0.013% fail on Parking brake performance
-
0.25% fail on
Rbt
-
0.17% fail on
Service Brake Efficiency (sp)
-
0.13% fail on
Rbt (sp)
(56% better than other 2013 cars)
- 0.10% fail on Service brake imbalance
- 0.039% fail on Service brake performance
- 0.039% fail on Decelerometer (sp) (4 times worse than other 2013 cars)
-
0.13% fail on
Rbt (sp)
(56% better than other 2013 cars)
- 0.039% fail on Brake performance not tested
-
1.3% fail on
Parking brake efficiency (sp)
(76% worse than other 2013 cars)
- 0.14% fail on Rigid brake pipes (52% better than other 2013 cars)
- 0.12% fail on Flexible brake hoses
-
0.090% fail on
Parking brake control
- 0.090% fail on Lever
-
0.090% fail on
ABS / EBS / ESC
(66% better than other 2013 cars)
- 0.078% fail on Anti-lock braking system
- 0.013% fail on Electronic stability control
-
0.052% fail on
Service brake pedal or hand lever
(70% better than other 2013 cars)
- 0.039% fail on Hand lever
- 0.013% fail on Pedal
-
0.013% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.013% fail on Hydraulic brake callipers
-
0.013% fail on
Other components and prescribed areas
- 0.013% fail on Other components
-
2.5% fail on
Mechanical brake components
-
4.3% fail on
Tyres
(15% better than other 2013 cars)
- 2.6% fail on Tread depth
- 2.0% fail on Condition (22% better than other 2013 cars)
- 0.065% fail on Size/type
-
2.1% fail on
Body, chassis, structure
- 1.2% fail on Exhaust system (61% worse than other 2013 cars)
-
0.48% fail on
Transmission
(42% better than other 2013 cars)
-
0.26% fail on
Prop shafts
(5 times worse than other 2013 cars)
- 0.17% fail on Prop shaft (24 times worse than other 2013 cars)
- 0.052% fail on Bearing housing (30 times worse than other 2013 cars)
- 0.026% fail on Flexible couplings (7 times worse than other 2013 cars)
- 0.013% fail on Joints
-
0.22% fail on
Drive shafts
(72% better than other 2013 cars)
- 0.22% fail on Joints (72% better than other 2013 cars)
-
0.26% fail on
Prop shafts
(5 times worse than other 2013 cars)
-
0.23% fail on
Doors
(100% worse than other 2013 cars)
-
0.19% fail on
Other passenger's door
(2 times worse than other 2013 cars)
- 0.18% fail on Door condition (2 times worse than other 2013 cars)
- 0.013% fail on Catch
-
0.039% fail on
Front passenger's door
- 0.039% fail on Door condition
-
0.013% fail on
Driver's door
- 0.013% fail on Door condition
-
0.19% fail on
Other passenger's door
(2 times worse than other 2013 cars)
-
0.065% fail on
Seats
- 0.065% fail on Driver's seat
-
0.039% fail on
Fuel system
- 0.026% fail on Pipe
- 0.013% fail on Tank
-
0.039% fail on
Engine mounting
- 0.026% fail on Engine mounting condition
- 0.013% fail on Bracket
-
0.039% fail on
Body
- 0.026% fail on Other body component
- 0.013% fail on Panel
- 0.026% fail on Bumpers
-
0.026% fail on
Boot lid
- 0.026% fail on Boot lid condition
-
1.9% fail on
Noise, emissions and leaks
-
1.6% fail on
Exhaust emissions
-
1.4% fail on
Spark ignition
(37% worse than other 2013 cars)
- 0.99% fail on Catalyst emissions (140% worse than other 2013 cars)
- 0.30% fail on Emissions not tested (140% worse than other 2013 cars)
- 0.22% fail on Malfunction indicator lamp (61% better than other 2013 cars)
-
0.25% fail on
Compression ignition
(60% better than other 2013 cars)
- 0.078% fail on Pre 01/07/2008 Non turbo (3 times worse than other 2013 cars)
- 0.078% fail on Malfunction indicator lamp (76% better than other 2013 cars)
- 0.052% fail on On or after 01/07/2008 (78% better than other 2013 cars)
- 0.039% fail on Emissions not tested
-
1.4% fail on
Spark ignition
(37% worse than other 2013 cars)
-
0.43% fail on
Fluid leaks
(4 times worse than other 2013 cars)
- 0.41% fail on Engine oil leaks (5 times worse than other 2013 cars)
- 0.013% fail on Transmission oil leaks
-
1.6% fail on
Exhaust emissions
-
0.75% fail on
Steering
(42% better than other 2013 cars)
-
0.68% fail on
Steering linkage components
(41% better than other 2013 cars)
- 0.67% fail on Track rod end (39% better than other 2013 cars)
- 0.013% fail on Ball joint
-
0.052% fail on
Steering gear
- 0.052% fail on Steering rack
-
0.013% fail on
Steering play
- 0.013% fail on Steering rack
- 0.013% fail on Electronic power steering
-
0.68% fail on
Steering linkage components
(41% better than other 2013 cars)
-
0.39% fail on
Seat belts and supplementary restraint systems
-
0.28% fail on
Seat belts
- 0.26% fail on Condition
- 0.013% fail on Prescribed areas
- 0.013% fail on Requirements
- 0.10% fail on SRS malfunction indicator lamp (66% better than other 2013 cars)
-
0.28% fail on
Seat belts
-
0.12% fail on
Identification of the vehicle
(58% better than other 2013 cars)
- 0.12% fail on Registration plates (58% better than other 2013 cars)
-
0.090% fail on
Road Wheels
(71% better than other 2013 cars)
- 0.065% fail on Attachment (74% better than other 2013 cars)
- 0.026% fail on Condition
Read the Honest John Review
-
Fiat Panda (2012 on)
Cute looks. Surprisingly practical. Fantastic value for money. Really easy to drive.