FIAT Panda MOT Results

Registered in 1990

66.7% pass rate

from 36 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the FIAT Panda is unusually good or bad.

17% fail on Lamps, reflectors and electrical equipment
- 5.6% fail on Stop lamp
- 2.8% fail on Headlamps
  - 2.8% fail on Headlamp
- 2.8% fail on Headlamp aim
  - 2.8% fail on Headlamp aim
- 2.8% fail on Front and rear fog lamps
  - 2.8% fail on Rear fog lamp
    - 2.8% fail on Rear fog lamp
- 2.8% fail on Registration plate lamp(s)
- 2.8% fail on Electrical equipment
  - 2.8% fail on Battery(ies)
11% fail on Visibility
- 8.3% fail on Washers
- 2.8% fail on Wipers
11% fail on Body, chassis, structure
- 5.6% fail on Transmission
  - 2.8% fail on Drive shafts
    - 2.8% fail on Joints
  - 2.8% fail on Prop shafts
    - 2.8% fail on Joints
- 2.8% fail on Exhaust system
- 2.8% fail on Bumpers
8.3% fail on Brakes
- 5.6% fail on Brake performance
  - 2.8% fail on Service Brake Efficiency (sp)
    - 2.8% fail on Rbt (sp)
      - 2.8% fail on Service brake imbalance
  - 2.8% fail on Parking brake efficiency (sp)
    - 2.8% fail on Rbt (sp)
- 2.8% fail on Rigid brake pipes
8.3% fail on Suspension
- 5.6% fail on Suspension arms
  - 5.6% fail on Pins and bushes (7 times worse than other 1990 cars)
  - 2.8% fail on Ball joint dust cover
- 2.8% fail on Shock absorbers
5.6% fail on Steering
- 5.6% fail on Steering linkage components
  - 5.6% fail on Track rod end
2.8% fail on Seat belts and supplementary restraint systems
- 2.8% fail on Seat belts
  - 2.8% fail on Prescribed areas
2.8% fail on Noise, emissions and leaks
- 2.8% fail on Fluid leaks
  - 2.8% fail on Transmission oil leaks
2.8% fail on Tyres
- 2.8% fail on Tread depth