FIAT Multipla MOT Results
Registered in 201157.8% pass rate
from 90 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2011 cars and highlighted areas where the FIAT Multipla is unusually good or bad.
-
18% fail on
Suspension
-
7.8% fail on
Suspension arms
- 6.7% fail on Pins and bushes (3 times worse than other 2011 cars)
- 1.1% fail on Ball joint
-
4.4% fail on
Springs
-
4.4% fail on
Coil springs
- 4.4% fail on Coil spring
-
4.4% fail on
Coil springs
-
4.4% fail on
Anti-roll bars
- 4.4% fail on Linkage ball joint dust cover (4 times worse than other 2011 cars)
- 2.2% fail on Wheel bearings
-
1.1% fail on
Sub-frames
- 1.1% fail on Sub-frame mounting prescribed areas
-
1.1% fail on
Other suspension component
- 1.1% fail on Ball joint
- 1.1% fail on Component mounting prescribed areas
-
7.8% fail on
Suspension arms
-
13% fail on
Brakes
-
8.9% fail on
Brake performance
(180% worse than other 2011 cars)
-
5.6% fail on
Service brake performance
(2 times worse than other 2011 cars)
-
5.6% fail on
Rbt
(2 times worse than other 2011 cars)
- 3.3% fail on Service brake performance
- 3.3% fail on Service brake imbalance (9 times worse than other 2011 cars)
-
5.6% fail on
Rbt
(2 times worse than other 2011 cars)
-
2.2% fail on
Parking brake performance
-
2.2% fail on
Rbt
- 1.1% fail on Parking brake performance
- 1.1% fail on Parking (secondary brake performance)
-
2.2% fail on
Rbt
-
2.2% fail on
Parking brake efficiency (sp)
- 2.2% fail on Rbt (sp)
-
1.1% fail on
Service Brake Efficiency (sp)
-
1.1% fail on
Rbt (sp)
- 1.1% fail on Service brake imbalance
-
1.1% fail on
Rbt (sp)
-
5.6% fail on
Service brake performance
(2 times worse than other 2011 cars)
-
2.2% fail on
Service brake pedal or hand lever
(7 times worse than other 2011 cars)
- 1.1% fail on Pedal
- 1.1% fail on Hand lever
-
1.1% fail on
Other components and prescribed areas
-
1.1% fail on
Prescribed areas
- 1.1% fail on Park brake mechanism/associated mountings
-
1.1% fail on
Prescribed areas
-
1.1% fail on
Mechanical brake components
-
1.1% fail on
Brake discs and drums
- 1.1% fail on Brake discs
-
1.1% fail on
Brake discs and drums
-
8.9% fail on
Brake performance
(180% worse than other 2011 cars)
-
12% fail on
Lamps, reflectors and electrical equipment
-
5.6% fail on
Headlamp aim
- 5.6% fail on Headlamp aim
-
3.3% fail on
Headlamps
- 3.3% fail on Headlamp
- 3.3% fail on Stop lamp
-
1.1% fail on
Direction indicators
-
1.1% fail on
Flashing type
- 1.1% fail on Side repeaters
-
1.1% fail on
Flashing type
- 1.1% fail on Registration plate lamp(s)
-
5.6% fail on
Headlamp aim
-
12% fail on
Body, chassis, structure
(2 times worse than other 2011 cars)
- 6.7% fail on Exhaust system (4 times worse than other 2011 cars)
-
3.3% fail on
Integral vehicle structure
(101 times worse than other 2011 cars)
- 3.3% fail on Integral vehicle structure condition (157 times worse than other 2011 cars)
-
1.1% fail on
Chassis
- 1.1% fail on Chassis condition
- 1.1% fail on Bumpers
- 1.1% fail on Floor
-
11% fail on
Tyres
- 8.9% fail on Condition (2 times worse than other 2011 cars)
- 4.4% fail on Tread depth
-
5.6% fail on
Steering
-
5.6% fail on
Steering linkage components
(2 times worse than other 2011 cars)
- 5.6% fail on Track rod end (2 times worse than other 2011 cars)
-
5.6% fail on
Steering linkage components
(2 times worse than other 2011 cars)
-
4.4% fail on
Visibility
- 3.3% fail on Wipers
- 2.2% fail on Washers
-
2.2% fail on
Noise, emissions and leaks
-
2.2% fail on
Exhaust emissions
-
2.2% fail on
Compression ignition
- 2.2% fail on Malfunction indicator lamp
-
2.2% fail on
Compression ignition
-
2.2% fail on
Exhaust emissions
-
1.1% fail on
Seat belts and supplementary restraint systems
-
1.1% fail on
Seat belts
- 1.1% fail on Prescribed areas
-
1.1% fail on
Seat belts