MOT Results

Honest John Good Garage Guide MOT Results » Daimler » V8 250 / 2.5 Litre » 1998

Daimler V8 250 / 2.5 Litre MOT Results

Registered in 1998
71.3% pass rate
from 80 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the Daimler V8 250 / 2.5 Litre is unusually good or bad.

  • 11% fail on Visibility
    • 6.3% fail on Wipers
    • 6.3% fail on Washers
  • 8.8% fail on Lamps, reflectors and electrical equipment
    • 5.0% fail on Direction indicators
      • 5.0% fail on Flashing type
        • 5.0% fail on Individual direction indicators
    • 2.5% fail on Stop lamp
    • 1.3% fail on Headlamps
      • 1.3% fail on Headlamp
    • 1.3% fail on Headlamp aim
      • 1.3% fail on Headlamp aim
  • 8.8% fail on Body, chassis, structure
    • 2.5% fail on Integral vehicle structure
      • 2.5% fail on Integral vehicle structure condition
    • 2.5% fail on Chassis
      • 2.5% fail on Chassis condition
    • 2.5% fail on Seats (6 times worse than other 1998 cars)
      • 2.5% fail on Driver's seat (10 times worse than other 1998 cars)
    • 1.3% fail on Exhaust system
    • 1.3% fail on Floor
  • 7.5% fail on Brakes
    • 3.8% fail on Brake performance
      • 3.8% fail on Parking brake efficiency (sp)
        • 3.8% fail on Rbt (sp)
      • 1.3% fail on Service Brake Efficiency (sp)
        • 1.3% fail on Rbt (sp)
          • 1.3% fail on Service brake performance
          • 1.3% fail on Service brake imbalance
    • 3.8% fail on ABS / EBS / ESC
      • 2.5% fail on Anti-lock braking system
      • 2.5% fail on Electronic stability control (13 times worse than other 1998 cars)
      • 1.3% fail on Electronic braking system
    • 2.5% fail on Rigid brake pipes
  • 6.3% fail on Suspension
    • 2.5% fail on Anti-roll bars
      • 1.3% fail on Pins and bushes
      • 1.3% fail on Ball joint
    • 1.3% fail on Suspension arms
      • 1.3% fail on Ball joint dust cover
    • 1.3% fail on Sub-frames
      • 1.3% fail on Sub-frame mounting prescribed areas
    • 1.3% fail on Component mounting prescribed areas
  • 3.8% fail on Seat belts and supplementary restraint systems
    • 2.5% fail on Seat belts
      • 2.5% fail on Prescribed areas
    • 1.3% fail on SRS malfunction indicator lamp
  • 2.5% fail on Steering
    • 1.3% fail on Steering gear
      • 1.3% fail on Steering rack
    • 1.3% fail on Steering linkage components
      • 1.3% fail on Track rod end
  • 2.5% fail on Noise, emissions and leaks
    • 1.3% fail on Exhaust emissions
      • 1.3% fail on Spark ignition
        • 1.3% fail on Catalyst emissions
    • 1.3% fail on Fluid leaks
      • 1.3% fail on Transmission oil leaks
  • 2.5% fail on Tyres
    • 2.5% fail on Condition

Search Good Garages