Daihatsu Copen MOT Results

Registered in 2003

68.0% pass rate

from 103 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2003 cars and highlighted areas where the Daihatsu Copen is unusually good or bad.

11% fail on Visibility
- 8.7% fail on Wipers
- 3.9% fail on Washers
11% fail on Suspension
- 6.8% fail on Component mounting prescribed areas
- 2.9% fail on Springs
  - 2.9% fail on Coil springs
    - 2.9% fail on Coil spring
- 0.97% fail on Wheel bearings
- 0.97% fail on Suspension arms
  - 0.97% fail on Attachment bracket and mounting
- 0.97% fail on Sub-frames
  - 0.97% fail on Sub-frame mounting prescribed areas
8.7% fail on Lamps, reflectors and electrical equipment
- 5.8% fail on Headlamps
  - 5.8% fail on Headlamp
- 1.9% fail on Headlamp aim
  - 0.97% fail on Headlamp aim
  - 0.97% fail on Headlamp aim not tested
- 0.97% fail on Stop lamp
- 0.97% fail on Electrical equipment
  - 0.97% fail on Horn
8.7% fail on Body, chassis, structure
- 3.9% fail on Integral vehicle structure (3 times worse than other 2003 cars)
  - 3.9% fail on Integral vehicle structure condition (3 times worse than other 2003 cars)
- 3.9% fail on Exhaust system
- 1.9% fail on Chassis
  - 1.9% fail on Chassis condition
- 0.97% fail on Cabs
  - 0.97% fail on Prescribed areas
8.7% fail on Noise, emissions and leaks
- 8.7% fail on Exhaust emissions
  - 8.7% fail on Spark ignition
    - 6.8% fail on Catalyst emissions
    - 1.9% fail on Malfunction indicator lamp
    - 1.9% fail on Emissions not tested
4.9% fail on Seat belts and supplementary restraint systems
- 4.9% fail on Seat belts
  - 2.9% fail on Prescribed areas
  - 1.9% fail on Condition
3.9% fail on Brakes (73% better than other 2003 cars)
- 1.9% fail on Rigid brake pipes
- 1.9% fail on Brake performance
  - 1.9% fail on Service brake performance
    - 1.9% fail on Rbt
      - 0.97% fail on Service brake performance
      - 0.97% fail on Service brake imbalance
- 0.97% fail on Hydraulic systems
  - 0.97% fail on Brake fluid
3.9% fail on Tyres
- 1.9% fail on Condition
- 1.9% fail on Tread depth