Citroen Xantia MOT Results
Registered in 199855.6% pass rate
from 81 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the Citroen Xantia is unusually good or bad.
-
15% fail on
Suspension
-
4.9% fail on
Anti-roll bars
- 2.5% fail on Ball joint dust cover (11 times worse than other 1998 cars)
- 2.5% fail on Linkage ball joint dust cover
- 1.2% fail on Linkage ball joints
-
3.7% fail on
Suspension arms
- 2.5% fail on Pins and bushes
- 2.5% fail on Ball joint
-
3.7% fail on
Air/gas/fluid suspension
(110 times worse than other 1998 cars)
- 2.5% fail on Suspension unit (320 times worse than other 1998 cars)
- 1.2% fail on Pipes
- 1.2% fail on Other components
- 3.7% fail on Component mounting prescribed areas
-
2.5% fail on
Sub-frames
- 2.5% fail on Sub-frame mounting prescribed areas (5 times worse than other 1998 cars)
-
4.9% fail on
Anti-roll bars
-
14% fail on
Steering
(2 times worse than other 1998 cars)
-
11% fail on
Steering gear
(9 times worse than other 1998 cars)
- 11% fail on Steering rack (9 times worse than other 1998 cars)
-
2.5% fail on
Steering linkage components
- 2.5% fail on Track rod end
-
11% fail on
Steering gear
(9 times worse than other 1998 cars)
-
11% fail on
Lamps, reflectors and electrical equipment
-
4.9% fail on
Headlamps
- 4.9% fail on Headlamp
-
4.9% fail on
Direction indicators
-
4.9% fail on
Flashing type
- 2.5% fail on Individual direction indicators
- 2.5% fail on Side repeaters
-
4.9% fail on
Flashing type
-
3.7% fail on
Electrical equipment
- 3.7% fail on Horn (6 times worse than other 1998 cars)
- 1.2% fail on Battery(ies)
-
1.2% fail on
Headlamp aim
- 1.2% fail on Headlamp aim not tested
- 1.2% fail on Stop lamp
- 1.2% fail on Registration plate lamp(s)
-
4.9% fail on
Headlamps
-
9.9% fail on
Brakes
-
6.2% fail on
Mechanical brake components
(2 times worse than other 1998 cars)
-
3.7% fail on
Brake linings and pads
- 3.7% fail on Brake pads
-
2.5% fail on
Brake discs and drums
- 2.5% fail on Brake discs
-
1.2% fail on
Brake cables, rods, levers and linkages
- 1.2% fail on Cable
-
3.7% fail on
Brake linings and pads
-
4.9% fail on
Brake performance
-
3.7% fail on
Service Brake Efficiency (sp)
-
3.7% fail on
Rbt (sp)
- 2.5% fail on Service brake performance
- 1.2% fail on Service brake imbalance
-
3.7% fail on
Rbt (sp)
-
1.2% fail on
Service brake performance
-
1.2% fail on
Rbt
- 1.2% fail on Service brake performance
-
1.2% fail on
Rbt
-
1.2% fail on
Parking brake efficiency (sp)
- 1.2% fail on Rbt (sp)
-
3.7% fail on
Service Brake Efficiency (sp)
- 1.2% fail on Rigid brake pipes
-
1.2% fail on
ABS / EBS / ESC
- 1.2% fail on Electronic stability control
-
6.2% fail on
Mechanical brake components
(2 times worse than other 1998 cars)
-
8.6% fail on
Visibility
- 4.9% fail on Washers
- 3.7% fail on Wipers
-
3.7% fail on
Body, chassis, structure
- 2.5% fail on Exhaust system
-
1.2% fail on
Fuel system
- 1.2% fail on Fuel cap/sealing device
-
3.7% fail on
Noise, emissions and leaks
-
3.7% fail on
Exhaust emissions
-
2.5% fail on
Compression ignition
- 1.2% fail on Pre 01/07/2008 Turbo
- 1.2% fail on Emissions not tested
-
1.2% fail on
Spark ignition
- 1.2% fail on Catalyst emissions
-
2.5% fail on
Compression ignition
-
3.7% fail on
Exhaust emissions
-
3.7% fail on
Tyres
- 2.5% fail on Condition
- 1.2% fail on Tread depth
-
2.5% fail on
Seat belts and supplementary restraint systems
-
2.5% fail on
Seat belts
- 1.2% fail on Prescribed areas
- 1.2% fail on Condition
-
2.5% fail on
Seat belts
-
1.2% fail on
Identification of the vehicle
- 1.2% fail on Registration plates