Citroen BX MOT Results
Registered in 199262.9% pass rate
from 62 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Citroen BX is unusually good or bad.
-
16% fail on
Suspension
- 8.1% fail on Component mounting prescribed areas
-
6.5% fail on
Suspension arms
- 4.8% fail on Pins and bushes (5 times worse than other 1992 cars)
- 1.6% fail on Ball joint dust cover
-
4.8% fail on
Air/gas/fluid suspension
(89 times worse than other 1992 cars)
- 4.8% fail on Pipes (161 times worse than other 1992 cars)
- 1.6% fail on Suspension unit
-
1.6% fail on
Axles
- 1.6% fail on Swivel pins and bushes
- 1.6% fail on Wheel bearings
- 1.6% fail on Shock absorbers
-
1.6% fail on
Macpherson strut
- 1.6% fail on Ball joint dust cover
-
1.6% fail on
Sub-frames
- 1.6% fail on Sub-frame mounting prescribed areas
-
11% fail on
Lamps, reflectors and electrical equipment
- 3.2% fail on Stop lamp
-
3.2% fail on
Front and rear fog lamps
-
3.2% fail on
Rear fog lamp
- 3.2% fail on Rear fog lamp
-
3.2% fail on
Rear fog lamp
-
3.2% fail on
Electrical equipment
- 1.6% fail on Battery(ies)
- 1.6% fail on Horn
-
1.6% fail on
Headlamp aim
- 1.6% fail on Headlamp aim
-
1.6% fail on
Direction indicators
-
1.6% fail on
Flashing type
- 1.6% fail on Individual direction indicators
-
1.6% fail on
Flashing type
-
1.6% fail on
Hazard warning
- 1.6% fail on Switch
- 1.6% fail on Registration plate lamp(s)
-
9.7% fail on
Brakes
-
6.5% fail on
Brake performance
-
3.2% fail on
Parking brake efficiency (sp)
- 3.2% fail on Rbt (sp)
-
1.6% fail on
Service Brake Efficiency (sp)
-
1.6% fail on
Rbt (sp)
- 1.6% fail on Service brake performance
-
1.6% fail on
Rbt (sp)
-
1.6% fail on
Parking brake performance
-
1.6% fail on
Rbt
- 1.6% fail on Parking brake performance
-
1.6% fail on
Rbt
-
3.2% fail on
Parking brake efficiency (sp)
- 1.6% fail on Rigid brake pipes
-
1.6% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.6% fail on Air brake cylinder/actuator
-
6.5% fail on
Brake performance
-
9.7% fail on
Body, chassis, structure
-
4.8% fail on
Integral vehicle structure
- 4.8% fail on Integral vehicle structure condition
-
4.8% fail on
Transmission
-
4.8% fail on
Drive shafts
- 4.8% fail on Joints
-
4.8% fail on
Drive shafts
-
4.8% fail on
Integral vehicle structure
-
8.1% fail on
Steering
-
6.5% fail on
Steering gear
(3 times worse than other 1992 cars)
- 6.5% fail on Steering rack (4 times worse than other 1992 cars)
-
1.6% fail on
Steering linkage components
- 1.6% fail on Track rod end
-
1.6% fail on
Power steering
- 1.6% fail on Rams
-
6.5% fail on
Steering gear
(3 times worse than other 1992 cars)
-
6.5% fail on
Visibility
- 6.5% fail on Washers
- 1.6% fail on Bonnet
-
6.5% fail on
Noise, emissions and leaks
-
6.5% fail on
Exhaust emissions
-
4.8% fail on
Spark ignition
- 3.2% fail on Non catalyst emissions
- 1.6% fail on Emissions not tested
-
1.6% fail on
Compression ignition
- 1.6% fail on Pre 01/07/2008 Non turbo
-
4.8% fail on
Spark ignition
-
6.5% fail on
Exhaust emissions
-
4.8% fail on
Seat belts and supplementary restraint systems
-
4.8% fail on
Seat belts
- 3.2% fail on Prescribed areas
- 1.6% fail on Condition
-
4.8% fail on
Seat belts
-
4.8% fail on
Tyres
- 4.8% fail on Tread depth (3 times worse than other 1992 cars)
-
1.6% fail on
Road Wheels
- 1.6% fail on Attachment