Chrysler Ypsilon MOT Results
Registered in 201163.4% pass rate
from 268 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2011 cars and highlighted areas where the Chrysler Ypsilon is unusually good or bad.
-
12% fail on
Suspension
-
8.6% fail on
Springs
(85% worse than other 2011 cars)
-
8.6% fail on
Coil springs
(85% worse than other 2011 cars)
- 8.6% fail on Coil spring (86% worse than other 2011 cars)
-
8.6% fail on
Coil springs
(85% worse than other 2011 cars)
-
1.5% fail on
Suspension arms
- 1.1% fail on Ball joint
- 0.37% fail on Pins and bushes
- 0.75% fail on Shock absorbers
-
0.75% fail on
Anti-roll bars
- 0.37% fail on Ball joint
- 0.37% fail on Linkage ball joint dust cover
- 0.37% fail on Wheel bearings
-
0.37% fail on
Other suspension component
- 0.37% fail on Pins and bushes
-
8.6% fail on
Springs
(85% worse than other 2011 cars)
-
9.7% fail on
Lamps, reflectors and electrical equipment
-
4.1% fail on
Direction indicators
(130% worse than other 2011 cars)
-
4.1% fail on
Flashing type
(130% worse than other 2011 cars)
- 2.6% fail on Individual direction indicators
- 1.1% fail on Side repeaters
- 0.37% fail on All direction indicators
-
4.1% fail on
Flashing type
(130% worse than other 2011 cars)
- 3.0% fail on Stop lamp
-
2.6% fail on
Headlamp aim
- 2.6% fail on Headlamp aim
-
1.5% fail on
Front and rear fog lamps
-
1.5% fail on
Rear fog lamp
- 1.5% fail on Rear fog lamp
-
1.5% fail on
Rear fog lamp
- 0.75% fail on Registration plate lamp(s)
-
0.75% fail on
Electrical equipment
- 0.75% fail on Battery(ies) (7 times worse than other 2011 cars)
-
0.37% fail on
Reversing lamps
- 0.37% fail on Reversing lamps
- 0.37% fail on Reversing lamp switch
-
4.1% fail on
Direction indicators
(130% worse than other 2011 cars)
-
7.5% fail on
Brakes
-
4.5% fail on
Brake performance
-
1.9% fail on
Service brake performance
-
1.9% fail on
Rbt
- 1.5% fail on Service brake performance
- 0.75% fail on Service brake imbalance
-
1.9% fail on
Rbt
-
1.5% fail on
Parking brake efficiency (sp)
- 1.5% fail on Rbt (sp)
-
1.1% fail on
Parking brake performance
-
0.75% fail on
Rbt
- 0.75% fail on Parking brake performance
-
0.37% fail on
Decelerometer
- 0.37% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.75% fail on
Rbt
-
0.37% fail on
Service Brake Efficiency (sp)
-
0.37% fail on
Rbt (sp)
- 0.37% fail on Service brake imbalance
-
0.37% fail on
Rbt (sp)
-
1.9% fail on
Service brake performance
-
2.2% fail on
Mechanical brake components
-
1.5% fail on
Brake linings and pads
- 1.5% fail on Brake pads
-
1.5% fail on
Brake discs and drums
- 1.5% fail on Brake discs
-
0.37% fail on
Brake cables, rods, levers and linkages
- 0.37% fail on Cable
-
1.5% fail on
Brake linings and pads
-
1.1% fail on
Parking brake control
- 1.1% fail on Lever
-
0.75% fail on
Service brake pedal or hand lever
- 0.75% fail on Hand lever
-
0.37% fail on
ABS / EBS / ESC
- 0.37% fail on Electronic stability control
-
4.5% fail on
Brake performance
-
7.1% fail on
Tyres
- 5.6% fail on Tread depth
- 2.2% fail on Condition
-
4.1% fail on
Visibility
- 2.6% fail on Wipers
- 2.6% fail on Washers
-
0.37% fail on
Condition of glass
- 0.37% fail on Windscreen
-
3.0% fail on
Noise, emissions and leaks
-
1.9% fail on
Exhaust emissions
-
1.5% fail on
Spark ignition
- 1.1% fail on Catalyst emissions
- 0.37% fail on Malfunction indicator lamp
-
0.37% fail on
Compression ignition
- 0.37% fail on Malfunction indicator lamp
-
1.5% fail on
Spark ignition
-
1.1% fail on
Fluid leaks
(6 times worse than other 2011 cars)
- 0.75% fail on Engine oil leaks (5 times worse than other 2011 cars)
- 0.37% fail on Transmission oil leaks
-
1.9% fail on
Exhaust emissions
-
2.6% fail on
Body, chassis, structure
- 1.5% fail on Exhaust system
-
0.37% fail on
Transmission
-
0.37% fail on
Drive shafts
- 0.37% fail on Joints
-
0.37% fail on
Drive shafts
-
0.37% fail on
Body
- 0.37% fail on Other body component
-
0.37% fail on
Boot lid
- 0.37% fail on Boot lid condition
-
1.1% fail on
Seat belts and supplementary restraint systems
-
1.1% fail on
Seat belts
- 1.1% fail on Condition
-
1.1% fail on
Seat belts
-
0.75% fail on
Steering
-
0.75% fail on
Steering linkage components
- 0.75% fail on Track rod end
-
0.75% fail on
Steering linkage components
-
0.37% fail on
Identification of the vehicle
- 0.37% fail on Registration plates