Chrysler PT Cruiser MOT Results
Registered in 200155.8% pass rate
from 165 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Chrysler PT Cruiser is unusually good or bad.
-
19% fail on
Suspension
-
10% fail on
Suspension arms
(100% worse than other 2001 cars)
- 6.1% fail on Pins and bushes (190% worse than other 2001 cars)
- 5.5% fail on Ball joint (140% worse than other 2001 cars)
- 1.2% fail on Ball joint dust cover
-
4.2% fail on
Anti-roll bars
- 1.8% fail on Linkage (3 times worse than other 2001 cars)
- 1.2% fail on Pins and bushes
- 1.2% fail on Linkage pins and bushes
- 0.61% fail on Attachment bracket and mounting
- 4.2% fail on Component mounting prescribed areas
-
3.0% fail on
Springs
-
3.0% fail on
Coil springs
- 2.4% fail on Coil spring
- 0.61% fail on Mounting
-
3.0% fail on
Coil springs
- 1.2% fail on Wheel bearings
-
0.61% fail on
Axles
- 0.61% fail on Swivel pins and bushes
-
0.61% fail on
Suspension rods
- 0.61% fail on Pins and bushes
-
0.61% fail on
Sub-frames
- 0.61% fail on Sub-frame mounting prescribed areas
-
0.61% fail on
Other suspension component
- 0.61% fail on Ball joint
-
10% fail on
Suspension arms
(100% worse than other 2001 cars)
-
15% fail on
Brakes
-
9.1% fail on
Brake performance
-
5.5% fail on
Service brake performance
-
5.5% fail on
Rbt
- 5.5% fail on Service brake performance
-
5.5% fail on
Rbt
-
3.0% fail on
Parking brake efficiency (sp)
- 3.0% fail on Rbt (sp)
- 0.61% fail on Brake performance not tested
-
0.61% fail on
Parking brake performance
-
0.61% fail on
Rbt
- 0.61% fail on Parking (secondary brake performance)
-
0.61% fail on
Rbt
-
5.5% fail on
Service brake performance
-
4.2% fail on
ABS / EBS / ESC
- 4.2% fail on Anti-lock braking system (180% worse than other 2001 cars)
- 0.61% fail on Electronic stability control
-
3.0% fail on
Mechanical brake components
-
2.4% fail on
Brake discs and drums
- 2.4% fail on Brake discs
-
0.61% fail on
Brake linings and pads
- 0.61% fail on Brake pads
-
2.4% fail on
Brake discs and drums
-
0.61% fail on
Hydraulic systems
- 0.61% fail on Brake fluid
-
0.61% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.61% fail on Hydraulic brake callipers
-
9.1% fail on
Brake performance
-
13% fail on
Lamps, reflectors and electrical equipment
-
3.6% fail on
Headlamps
- 3.6% fail on Headlamp
-
3.0% fail on
Electrical equipment
(2 times worse than other 2001 cars)
- 3.0% fail on Horn (7 times worse than other 2001 cars)
-
2.4% fail on
Headlamp aim
- 2.4% fail on Headlamp aim
-
2.4% fail on
Front and rear fog lamps
-
2.4% fail on
Rear fog lamp
- 2.4% fail on Rear fog lamp
-
2.4% fail on
Rear fog lamp
- 1.2% fail on Stop lamp
-
1.2% fail on
Direction indicators
-
1.2% fail on
Flashing type
- 1.2% fail on Individual direction indicators
- 0.61% fail on Side repeaters
-
1.2% fail on
Flashing type
-
0.61% fail on
Hazard warning
- 0.61% fail on Switch
- 0.61% fail on Registration plate lamp(s)
-
3.6% fail on
Headlamps
-
9.7% fail on
Visibility
- 5.5% fail on Washers
- 4.8% fail on Wipers
-
7.9% fail on
Noise, emissions and leaks
-
7.3% fail on
Exhaust emissions
-
7.3% fail on
Spark ignition
- 6.1% fail on Catalyst emissions
- 1.8% fail on Malfunction indicator lamp
-
0.61% fail on
Compression ignition
- 0.61% fail on Pre 01/07/2008 Non turbo
-
7.3% fail on
Spark ignition
-
0.61% fail on
Fluid leaks
- 0.61% fail on Engine oil leaks
-
7.3% fail on
Exhaust emissions
-
7.3% fail on
Body, chassis, structure
- 2.4% fail on Exhaust system
-
1.8% fail on
Chassis
- 1.8% fail on Chassis condition
-
1.2% fail on
Engine mounting
(13 times worse than other 2001 cars)
- 1.2% fail on Engine mounting condition (16 times worse than other 2001 cars)
-
0.61% fail on
Integral vehicle structure
- 0.61% fail on Integral vehicle structure condition
-
0.61% fail on
Fuel system
- 0.61% fail on Tank
-
0.61% fail on
Spare wheel
- 0.61% fail on Carrier
-
0.61% fail on
Transmission
-
0.61% fail on
Drive shafts
- 0.61% fail on Joints
-
0.61% fail on
Drive shafts
-
0.61% fail on
Doors
-
0.61% fail on
Other passenger's door
- 0.61% fail on Door condition
-
0.61% fail on
Other passenger's door
- 0.61% fail on Undertray
-
4.2% fail on
Tyres
- 2.4% fail on Condition
- 1.8% fail on Tread depth
-
3.6% fail on
Steering
-
3.6% fail on
Steering linkage components
- 3.6% fail on Track rod end
-
3.6% fail on
Steering linkage components
-
1.8% fail on
Seat belts and supplementary restraint systems
-
1.8% fail on
Seat belts
- 1.2% fail on Prescribed areas
- 0.61% fail on Condition
-
1.8% fail on
Seat belts
-
1.2% fail on
Identification of the vehicle
- 1.2% fail on Registration plates
-
1.2% fail on
Road Wheels
- 1.2% fail on Attachment