MOT Results

Honest John Good Garage Guide MOT Results » Chrysler » Neon » 2001

Chrysler Neon MOT Results

Registered in 2001
54.7% pass rate
from 64 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Chrysler Neon is unusually good or bad.

  • 23% fail on Suspension
    • 11% fail on Suspension arms
      • 7.8% fail on Pins and bushes (2 times worse than other 2001 cars)
      • 1.6% fail on Ball joint
      • 1.6% fail on Ball joint dust cover
    • 9.4% fail on Anti-roll bars
      • 4.7% fail on Linkage pins and bushes (6 times worse than other 2001 cars)
      • 3.1% fail on Linkage (6 times worse than other 2001 cars)
      • 1.6% fail on Attachment bracket and mounting
    • 3.1% fail on Sub-frames
      • 3.1% fail on Sub-frame mounting prescribed areas (8 times worse than other 2001 cars)
    • 3.1% fail on Component mounting prescribed areas
    • 1.6% fail on Wheel bearings
  • 22% fail on Lamps, reflectors and electrical equipment
    • 6.3% fail on Stop lamp
    • 6.3% fail on Front and rear fog lamps (3 times worse than other 2001 cars)
      • 6.3% fail on Rear fog lamp (3 times worse than other 2001 cars)
        • 6.3% fail on Rear fog lamp (3 times worse than other 2001 cars)
    • 4.7% fail on Headlamp aim
      • 4.7% fail on Headlamp aim
    • 4.7% fail on Direction indicators
      • 4.7% fail on Flashing type
        • 3.1% fail on Individual direction indicators
        • 1.6% fail on Side repeaters
    • 3.1% fail on Headlamps
      • 3.1% fail on Headlamp
    • 1.6% fail on Mandatory tell-tales
      • 1.6% fail on Rear fog lamp tell-tale
    • 1.6% fail on Electrical equipment
      • 1.6% fail on Battery(ies)
  • 14% fail on Tyres (160% worse than other 2001 cars)
    • 6.3% fail on Condition
    • 6.3% fail on Tread depth
    • 1.6% fail on Size/type
  • 9.4% fail on Visibility
    • 6.3% fail on Wipers
    • 1.6% fail on Bonnet
    • 1.6% fail on Washers
  • 9.4% fail on Body, chassis, structure
    • 3.1% fail on Integral vehicle structure
      • 3.1% fail on Integral vehicle structure condition
    • 3.1% fail on Chassis
      • 3.1% fail on Chassis condition
    • 3.1% fail on Exhaust system
    • 1.6% fail on Engine mounting
      • 1.6% fail on Bracket
  • 7.8% fail on Brakes
    • 6.3% fail on Brake performance
      • 4.7% fail on Parking brake efficiency (sp)
        • 4.7% fail on Rbt (sp)
      • 1.6% fail on Service brake performance
        • 1.6% fail on Rbt
          • 1.6% fail on Service brake performance
    • 3.1% fail on Mechanical brake components
      • 3.1% fail on Brake linings and pads
        • 3.1% fail on Brake pads
    • 3.1% fail on ABS / EBS / ESC
      • 3.1% fail on Anti-lock braking system
    • 1.6% fail on Service brake pedal or hand lever
      • 1.6% fail on Hand lever
    • 1.6% fail on Rigid brake pipes
  • 6.3% fail on Steering
    • 6.3% fail on Steering linkage components
      • 6.3% fail on Track rod end
  • 4.7% fail on Seat belts and supplementary restraint systems
    • 4.7% fail on Seat belts
      • 4.7% fail on Prescribed areas
  • 3.1% fail on Noise, emissions and leaks
    • 3.1% fail on Exhaust emissions
      • 3.1% fail on Spark ignition
        • 1.6% fail on Catalyst emissions
        • 1.6% fail on Emissions not tested
  • 1.6% fail on Identification of the vehicle
    • 1.6% fail on Registration plates

Search Good Garages