Chrysler 300 MOT Results
Registered in 200865.4% pass rate
from 136 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2008 cars and highlighted areas where the Chrysler 300 is unusually good or bad.
-
24% fail on
Brakes
(130% worse than other 2008 cars)
-
21% fail on
Brake performance
(3 times worse than other 2008 cars)
-
21% fail on
Parking brake efficiency (sp)
(7 times worse than other 2008 cars)
- 20% fail on Rbt (sp) (7 times worse than other 2008 cars)
- 0.74% fail on Decelerometer (sp)
-
3.7% fail on
Service brake performance
-
3.7% fail on
Rbt
- 2.9% fail on Service brake performance
- 0.74% fail on Service brake imbalance
-
0.74% fail on
Plate brake tester
- 0.74% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
3.7% fail on
Rbt
-
1.5% fail on
Parking brake performance
-
1.5% fail on
Rbt
- 0.74% fail on Parking brake performance
- 0.74% fail on Parking (secondary brake performance)
-
1.5% fail on
Rbt
-
21% fail on
Parking brake efficiency (sp)
(7 times worse than other 2008 cars)
- 2.9% fail on Rigid brake pipes
-
2.9% fail on
ABS / EBS / ESC
- 2.9% fail on Anti-lock braking system (2 times worse than other 2008 cars)
- 1.5% fail on Electronic stability control
-
0.74% fail on
Parking brake control
- 0.74% fail on Lever
-
0.74% fail on
Mechanical brake components
-
0.74% fail on
Brake linings and pads
- 0.74% fail on Brake pads
-
0.74% fail on
Brake linings and pads
-
21% fail on
Brake performance
(3 times worse than other 2008 cars)
-
13% fail on
Suspension
-
10% fail on
Suspension arms
(110% worse than other 2008 cars)
- 5.1% fail on Pins and bushes
- 3.7% fail on Ball joint dust cover (4 times worse than other 2008 cars)
- 2.2% fail on Ball joint
- 0.74% fail on Suspension arm
-
2.2% fail on
Anti-roll bars
- 1.5% fail on Ball joint dust cover
- 0.74% fail on Linkage
- 0.74% fail on Ball joint
-
1.5% fail on
Other suspension component
- 1.5% fail on Ball joint dust cover (26 times worse than other 2008 cars)
- 0.74% fail on Shock absorbers
-
10% fail on
Suspension arms
(110% worse than other 2008 cars)
-
5.1% fail on
Lamps, reflectors and electrical equipment
(62% better than other 2008 cars)
-
1.5% fail on
Headlamps
- 1.5% fail on Headlamp
-
1.5% fail on
Headlamp aim
- 1.5% fail on Headlamp aim
- 1.5% fail on Stop lamp
-
0.74% fail on
Position lamps
- 0.74% fail on Position lamp
-
0.74% fail on
Direction indicators
-
0.74% fail on
Flashing type
- 0.74% fail on Side repeaters
-
0.74% fail on
Flashing type
- 0.74% fail on Registration plate lamp(s)
-
1.5% fail on
Headlamps
-
4.4% fail on
Tyres
- 2.9% fail on Tread depth
- 1.5% fail on Condition
-
2.2% fail on
Steering
-
1.5% fail on
Steering linkage components
- 1.5% fail on Track rod end
-
0.74% fail on
Power steering
- 0.74% fail on Operation
-
1.5% fail on
Steering linkage components
-
2.2% fail on
Visibility
- 1.5% fail on Washers
- 0.74% fail on Wipers
-
2.2% fail on
Noise, emissions and leaks
-
2.2% fail on
Exhaust emissions
-
2.2% fail on
Compression ignition
- 2.2% fail on Malfunction indicator lamp
-
2.2% fail on
Compression ignition
-
2.2% fail on
Exhaust emissions
-
0.74% fail on
Body, chassis, structure
-
0.74% fail on
Integral vehicle structure
- 0.74% fail on Integral vehicle structure condition
-
0.74% fail on
Integral vehicle structure
-
0.74% fail on
Road Wheels
- 0.74% fail on Attachment