BMW 3-Series MOT Results
Registered in 198469.4% pass rate
from 62 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1984 cars and highlighted areas where the BMW 3-Series is unusually good or bad.
-
13% fail on
Brakes
-
4.8% fail on
Brake performance
-
3.2% fail on
Service brake performance
-
3.2% fail on
Rbt
- 1.6% fail on Service brake performance
- 1.6% fail on Service brake imbalance
-
3.2% fail on
Rbt
-
3.2% fail on
Parking brake efficiency (sp)
- 3.2% fail on Rbt (sp)
-
1.6% fail on
Service Brake Efficiency (sp)
-
1.6% fail on
Rbt (sp)
- 1.6% fail on Service brake imbalance
-
1.6% fail on
Rbt (sp)
-
1.6% fail on
Parking brake performance
-
1.6% fail on
Rbt
- 1.6% fail on Parking brake performance
-
1.6% fail on
Rbt
-
3.2% fail on
Service brake performance
- 3.2% fail on Rigid brake pipes
- 3.2% fail on Flexible brake hoses (8 times worse than other 1984 cars)
-
1.6% fail on
Hydraulic systems
- 1.6% fail on Reservoirs
-
1.6% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.6% fail on Hydraulic brake cylinder
-
1.6% fail on
Mechanical brake components
-
1.6% fail on
Brake discs and drums
- 1.6% fail on Brake discs
-
1.6% fail on
Brake discs and drums
-
4.8% fail on
Brake performance
-
13% fail on
Lamps, reflectors and electrical equipment
-
6.5% fail on
Headlamp aim
- 6.5% fail on Headlamp aim
-
3.2% fail on
Headlamps
- 1.6% fail on Headlamp
- 1.6% fail on Dipswitch
-
3.2% fail on
Direction indicators
-
3.2% fail on
Flashing type
- 1.6% fail on All direction indicators
- 1.6% fail on Individual direction indicators
-
3.2% fail on
Flashing type
-
6.5% fail on
Headlamp aim
-
9.7% fail on
Suspension
- 4.8% fail on Component mounting prescribed areas
-
3.2% fail on
Suspension arms
- 1.6% fail on Pins and bushes
- 1.6% fail on Ball joint
- 1.6% fail on Wheel bearings
-
1.6% fail on
Anti-roll bars
- 1.6% fail on Linkage pins and bushes
-
1.6% fail on
Other suspension component
- 1.6% fail on Pins and bushes
-
9.7% fail on
Body, chassis, structure
-
3.2% fail on
Fuel system
- 1.6% fail on Hose
- 1.6% fail on Fuel cap/sealing device
-
1.6% fail on
Integral vehicle structure
- 1.6% fail on Integral vehicle structure condition
-
1.6% fail on
Chassis
- 1.6% fail on Chassis condition
- 1.6% fail on Exhaust system
-
1.6% fail on
Doors
-
1.6% fail on
Other passenger's door
- 1.6% fail on Door condition
-
1.6% fail on
Other passenger's door
-
3.2% fail on
Fuel system
-
6.5% fail on
Steering
-
3.2% fail on
Steering gear
- 1.6% fail on Operation
- 1.6% fail on Steering rack
-
3.2% fail on
Steering linkage components
- 3.2% fail on Track rod end
-
3.2% fail on
Steering gear
-
6.5% fail on
Visibility
- 4.8% fail on Washers
- 1.6% fail on Wipers
-
3.2% fail on
Noise, emissions and leaks
-
1.6% fail on
Exhaust emissions
-
1.6% fail on
Spark ignition
- 1.6% fail on Non catalyst emissions
-
1.6% fail on
Spark ignition
-
1.6% fail on
Fluid leaks
- 1.6% fail on Engine oil leaks
-
1.6% fail on
Exhaust emissions
-
1.6% fail on
Seat belts and supplementary restraint systems
-
1.6% fail on
Seat belts
- 1.6% fail on Prescribed areas
-
1.6% fail on
Seat belts
-
1.6% fail on
Tyres
- 1.6% fail on Condition