Bentley Turbo MOT Results

Registered in 1997
79.7% pass rate
from 236 tests in 2020
(52% better than other 1997 cars)
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Bentley Turbo is unusually good or bad.

  • 7.6% fail on Lamps, reflectors and electrical equipment (53% better than other 1997 cars)
    • 2.5% fail on Headlamp aim
      • 2.5% fail on Headlamp aim
    • 2.1% fail on Front and rear fog lamps
      • 2.1% fail on Rear fog lamp
        • 2.1% fail on Rear fog lamp
    • 1.3% fail on Headlamps
      • 1.3% fail on Headlamp
    • 0.85% fail on Position lamps
      • 0.85% fail on Position lamp
    • 0.85% fail on Direction indicators
      • 0.85% fail on Flashing type
        • 0.42% fail on Individual direction indicators
        • 0.42% fail on Side repeaters
    • 0.85% fail on Registration plate lamp(s)
    • 0.42% fail on Stop lamp
    • 0.42% fail on Mandatory tell-tales
      • 0.42% fail on Rear fog lamp tell-tale
    • 0.42% fail on Electrical equipment
      • 0.42% fail on Horn
  • 7.2% fail on Brakes (45% better than other 1997 cars)
    • 5.1% fail on Brake performance
      • 3.4% fail on Parking brake efficiency (sp)
        • 3.4% fail on Rbt (sp)
      • 0.85% fail on Service brake performance
        • 0.85% fail on Rbt
          • 0.85% fail on Service brake imbalance
      • 0.85% fail on Parking brake performance
        • 0.85% fail on Rbt
          • 0.85% fail on Parking brake performance
      • 0.42% fail on Brake performance not tested
      • 0.42% fail on Service Brake Efficiency (sp)
        • 0.42% fail on Rbt (sp)
          • 0.42% fail on Service brake imbalance
    • 1.3% fail on Rigid brake pipes
    • 1.3% fail on Mechanical brake components
      • 1.3% fail on Brake linings and pads
        • 1.3% fail on Brake pads
    • 0.85% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.85% fail on Hydraulic brake callipers (6 times worse than other 1997 cars)
    • 0.42% fail on Parking brake control
      • 0.42% fail on Lever
  • 6.8% fail on Suspension (53% better than other 1997 cars)
    • 2.5% fail on Shock absorbers
    • 2.5% fail on Suspension arms
      • 2.5% fail on Ball joint
      • 0.42% fail on Ball joint dust cover
    • 1.3% fail on Springs
      • 0.85% fail on Spring mounting prescribed areas
      • 0.42% fail on Coil springs
        • 0.42% fail on Coil spring
    • 0.85% fail on Other suspension component
      • 0.42% fail on Attachment bracket and mounting
      • 0.42% fail on Ball joint
    • 0.42% fail on Wheel bearings
  • 3.0% fail on Steering
    • 1.7% fail on Power steering
      • 0.85% fail on Pipes and hoses
      • 0.85% fail on Other components
    • 1.3% fail on Steering linkage components
      • 1.3% fail on Track rod end
  • 3.0% fail on Visibility (59% better than other 1997 cars)
    • 2.1% fail on Wipers
    • 1.7% fail on Washers
  • 2.5% fail on Tyres
    • 2.1% fail on Condition
    • 0.85% fail on Tread depth
  • 1.3% fail on Body, chassis, structure (88% better than other 1997 cars)
    • 0.42% fail on Integral vehicle structure
      • 0.42% fail on Integral vehicle structure condition
    • 0.42% fail on Exhaust system
    • 0.42% fail on Boot lid
      • 0.42% fail on Boot lid condition
  • 0.85% fail on Identification of the vehicle
    • 0.85% fail on Registration plates
  • 0.85% fail on Seat belts and supplementary restraint systems (81% better than other 1997 cars)
    • 0.85% fail on Seat belts
      • 0.42% fail on Requirements
      • 0.42% fail on Condition
  • 0.42% fail on Noise, emissions and leaks
    • 0.42% fail on Fluid leaks
      • 0.42% fail on Hydraulic fluid leaks

Search Good Garages