Bentley Turbo MOT Results
Registered in 199087.2% pass rate
from 94 tests in 2021
(57% better than other 1990 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the Bentley Turbo is unusually good or bad.
-
8.5% fail on
Brakes
-
5.3% fail on
Brake performance
-
3.2% fail on
Parking brake efficiency (sp)
- 3.2% fail on Rbt (sp)
- 1.1% fail on Brake performance not tested
-
1.1% fail on
Service Brake Efficiency (sp)
-
1.1% fail on
Rbt (sp)
- 1.1% fail on Service brake imbalance
-
1.1% fail on
Rbt (sp)
-
3.2% fail on
Parking brake efficiency (sp)
-
4.3% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(19 times worse than other 1990 cars)
- 3.2% fail on Hydraulic brake callipers (25 times worse than other 1990 cars)
- 1.1% fail on Hydraulic brake cylinder
- 1.1% fail on Rigid brake pipes
-
5.3% fail on
Brake performance
-
5.3% fail on
Suspension
-
2.1% fail on
Suspension arms
- 1.1% fail on Suspension arm
- 1.1% fail on Ball joint dust cover
-
1.1% fail on
Springs
-
1.1% fail on
Coil springs
- 1.1% fail on Coil spring
-
1.1% fail on
Coil springs
- 1.1% fail on Shock absorbers
-
1.1% fail on
Sub-frames
- 1.1% fail on Sub-frame
-
1.1% fail on
Other suspension component
- 1.1% fail on Ball joint dust cover
-
2.1% fail on
Suspension arms
-
3.2% fail on
Visibility
- 2.1% fail on Wipers
- 2.1% fail on Washers
-
3.2% fail on
Lamps, reflectors and electrical equipment
(78% better than other 1990 cars)
-
2.1% fail on
Headlamps
- 2.1% fail on Headlamp
-
1.1% fail on
Headlamp aim
- 1.1% fail on Headlamp aim
-
1.1% fail on
Direction indicators
-
1.1% fail on
Flashing type
- 1.1% fail on Side repeaters
-
1.1% fail on
Flashing type
-
1.1% fail on
Front and rear fog lamps
-
1.1% fail on
Rear fog lamp
- 1.1% fail on Rear fog lamp
-
1.1% fail on
Rear fog lamp
- 1.1% fail on Registration plate lamp(s)
-
2.1% fail on
Headlamps
-
2.1% fail on
Body, chassis, structure
-
1.1% fail on
Chassis
- 1.1% fail on Chassis condition
-
1.1% fail on
Transmission
-
1.1% fail on
Drive shafts
- 1.1% fail on Joints
-
1.1% fail on
Prop shafts
- 1.1% fail on Joints
-
1.1% fail on
Drive shafts
-
1.1% fail on
Seats
- 1.1% fail on Driver's seat
-
1.1% fail on
Chassis
-
1.1% fail on
Identification of the vehicle
- 1.1% fail on Registration plates
-
1.1% fail on
Road Wheels
- 1.1% fail on Attachment