Bentley Mulsanne MOT Results

Registered in 1988
78.9% pass rate
from 76 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Bentley Mulsanne is unusually good or bad.

  • 11% fail on Brakes
    • 6.6% fail on Brake performance
      • 6.6% fail on Parking brake efficiency (sp)
        • 6.6% fail on Rbt (sp)
      • 1.3% fail on Parking brake performance
        • 1.3% fail on Rbt
          • 1.3% fail on Parking brake performance
    • 3.9% fail on Brake actuators (including spring brakes or hydraulic cylinders) (16 times worse than other 1988 cars)
      • 2.6% fail on Hydraulic brake callipers (20 times worse than other 1988 cars)
      • 1.3% fail on Hydraulic brake cylinder
    • 2.6% fail on Hydraulic systems (6 times worse than other 1988 cars)
      • 2.6% fail on Brake fluid (11 times worse than other 1988 cars)
    • 2.6% fail on Rigid brake pipes
    • 2.6% fail on ABS / EBS / ESC (9 times worse than other 1988 cars)
      • 2.6% fail on Anti-lock braking system (9 times worse than other 1988 cars)
    • 1.3% fail on Parking brake control
      • 1.3% fail on Lever
  • 9.2% fail on Noise, emissions and leaks
    • 6.6% fail on Exhaust emissions
      • 6.6% fail on Spark ignition
        • 5.3% fail on Non catalyst emissions
        • 1.3% fail on Catalyst emissions
    • 3.9% fail on Fluid leaks (4 times worse than other 1988 cars)
      • 3.9% fail on Hydraulic fluid leaks (33 times worse than other 1988 cars)
  • 7.9% fail on Lamps, reflectors and electrical equipment
    • 2.6% fail on Headlamps
      • 2.6% fail on Headlamp
    • 2.6% fail on Direction indicators
      • 2.6% fail on Flashing type
        • 2.6% fail on Individual direction indicators
    • 2.6% fail on Registration plate lamp(s)
    • 1.3% fail on Headlamp aim
      • 1.3% fail on Headlamp aim
    • 1.3% fail on Position lamps
      • 1.3% fail on Position lamp
    • 1.3% fail on Stop lamp
    • 1.3% fail on Mandatory tell-tales
      • 1.3% fail on Main beam tell-tale
  • 6.6% fail on Suspension
    • 2.6% fail on Component mounting prescribed areas
    • 1.3% fail on Wheel bearings
    • 1.3% fail on Springs
      • 1.3% fail on Spring mounting prescribed areas
    • 1.3% fail on Air/gas/fluid suspension
      • 1.3% fail on Accumulator
  • 3.9% fail on Steering
    • 2.6% fail on Steering linkage components
      • 2.6% fail on Track rod end
    • 1.3% fail on Power steering
      • 1.3% fail on Other components
  • 3.9% fail on Visibility
    • 2.6% fail on Wipers
    • 2.6% fail on Washers
  • 2.6% fail on Tyres
    • 2.6% fail on Condition

Search Good Garages