MOT Results

Honest John Good Garage Guide MOT Results » Bentley » Brooklands » 1996

Bentley Brooklands MOT Results

Registered in 1996
80.8% pass rate
from 99 tests in 2021
(45% better than other 1996 cars)
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Bentley Brooklands is unusually good or bad.

  • 12% fail on Brakes
    • 8.1% fail on Brake performance
      • 6.1% fail on Parking brake efficiency (sp)
        • 6.1% fail on Rbt (sp)
      • 2.0% fail on Brake performance not tested
      • 1.0% fail on Service brake performance
        • 1.0% fail on Rbt
          • 1.0% fail on Service brake performance
    • 3.0% fail on Brake actuators (including spring brakes or hydraulic cylinders) (14 times worse than other 1996 cars)
      • 3.0% fail on Hydraulic brake callipers (26 times worse than other 1996 cars)
    • 2.0% fail on Mechanical brake components
      • 1.0% fail on Brake linings and pads
        • 1.0% fail on Brake pads
      • 1.0% fail on Brake discs and drums
        • 1.0% fail on Brake discs
    • 1.0% fail on Hydraulic systems
      • 1.0% fail on Valves
    • 1.0% fail on Rigid brake pipes
  • 7.1% fail on Lamps, reflectors and electrical equipment
    • 3.0% fail on Front and rear fog lamps
      • 3.0% fail on Rear fog lamp
        • 3.0% fail on Rear fog lamp
    • 2.0% fail on Headlamps
      • 2.0% fail on Headlamp
    • 2.0% fail on Registration plate lamp(s)
    • 1.0% fail on Direction indicators
      • 1.0% fail on Flashing type
        • 1.0% fail on Individual direction indicators
    • 1.0% fail on Mandatory tell-tales
      • 1.0% fail on Rear fog lamp tell-tale
    • 1.0% fail on Electrical equipment
      • 1.0% fail on Electrical wiring
  • 5.1% fail on Suspension
    • 2.0% fail on Springs
      • 2.0% fail on Coil springs
        • 2.0% fail on Coil spring
    • 2.0% fail on Shock absorbers
    • 1.0% fail on Suspension arms
      • 1.0% fail on Ball joint
    • 1.0% fail on Air/gas/fluid suspension
      • 1.0% fail on Pipes
  • 3.0% fail on Visibility
    • 3.0% fail on Washers
  • 2.0% fail on Seat belts and supplementary restraint systems
    • 2.0% fail on Seat belts
      • 2.0% fail on Condition
  • 2.0% fail on Tyres
    • 2.0% fail on Condition
  • 1.0% fail on Body, chassis, structure
    • 1.0% fail on Integral vehicle structure
      • 1.0% fail on Integral vehicle structure condition

Search Good Garages