Bedford Rascal MOT Results
Registered in 198856.5% pass rate
from 85 tests in 2021
(44% worse than other 1988 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Bedford Rascal is unusually good or bad.
-
22% fail on
Lamps, reflectors and electrical equipment
-
11% fail on
Front and rear fog lamps
(2 times worse than other 1988 cars)
-
11% fail on
Rear fog lamp
(2 times worse than other 1988 cars)
- 11% fail on Rear fog lamp (2 times worse than other 1988 cars)
-
11% fail on
Rear fog lamp
(2 times worse than other 1988 cars)
-
7.1% fail on
Headlamp aim
- 7.1% fail on Headlamp aim
-
5.9% fail on
Direction indicators
-
5.9% fail on
Flashing type
- 2.4% fail on Individual direction indicators
- 2.4% fail on Side repeaters
- 1.2% fail on All direction indicators
-
5.9% fail on
Flashing type
- 4.7% fail on Stop lamp
- 2.4% fail on Registration plate lamp(s)
-
2.4% fail on
Electrical equipment
- 2.4% fail on Horn
- 1.2% fail on Battery(ies)
-
1.2% fail on
Headlamps
- 1.2% fail on Headlamp
-
1.2% fail on
Mandatory tell-tales
- 1.2% fail on Main beam tell-tale
-
11% fail on
Front and rear fog lamps
(2 times worse than other 1988 cars)
-
18% fail on
Brakes
-
14% fail on
Brake performance
-
9.4% fail on
Service Brake Efficiency (sp)
(200% worse than other 1988 cars)
-
9.4% fail on
Rbt (sp)
(2 times worse than other 1988 cars)
- 5.9% fail on Service brake performance (3 times worse than other 1988 cars)
- 4.7% fail on Service brake imbalance
-
9.4% fail on
Rbt (sp)
(2 times worse than other 1988 cars)
-
7.1% fail on
Service brake performance
-
7.1% fail on
Rbt
- 7.1% fail on Service brake performance
-
7.1% fail on
Rbt
- 1.2% fail on Brake performance not tested
-
1.2% fail on
Parking brake efficiency (sp)
- 1.2% fail on Rbt (sp)
-
9.4% fail on
Service Brake Efficiency (sp)
(200% worse than other 1988 cars)
- 3.5% fail on Rigid brake pipes
-
1.2% fail on
Service brake pedal or hand lever
- 1.2% fail on Hand lever
-
1.2% fail on
Pressure storage reservoirs
- 1.2% fail on Air and vacuum systems
- 1.2% fail on Flexible brake hoses
-
1.2% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.2% fail on Hydraulic brake callipers
-
1.2% fail on
Mechanical brake components
-
1.2% fail on
Brake discs and drums
- 1.2% fail on Brake discs
-
1.2% fail on
Brake discs and drums
-
14% fail on
Brake performance
-
14% fail on
Suspension
- 8.2% fail on Component mounting prescribed areas
- 3.5% fail on Wheel bearings
-
2.4% fail on
Springs
-
2.4% fail on
Leaf springs
(41 times worse than other 1988 cars)
- 2.4% fail on Anchor pins and bushes (146 times worse than other 1988 cars)
- 1.2% fail on Shackle pins and bushes
-
2.4% fail on
Leaf springs
(41 times worse than other 1988 cars)
-
2.4% fail on
Suspension arms
- 2.4% fail on Ball joint dust cover
-
2.4% fail on
Suspension rods
(12 times worse than other 1988 cars)
- 2.4% fail on Pins and bushes (18 times worse than other 1988 cars)
-
13% fail on
Noise, emissions and leaks
(120% worse than other 1988 cars)
-
13% fail on
Exhaust emissions
(150% worse than other 1988 cars)
-
13% fail on
Spark ignition
(170% worse than other 1988 cars)
- 7.1% fail on Non catalyst emissions
- 3.5% fail on Emissions not tested (6 times worse than other 1988 cars)
- 2.4% fail on Catalyst emissions
-
13% fail on
Spark ignition
(170% worse than other 1988 cars)
-
13% fail on
Exhaust emissions
(150% worse than other 1988 cars)
-
11% fail on
Steering
(170% worse than other 1988 cars)
- 5.9% fail on Prescribed areas (28 times worse than other 1988 cars)
-
2.4% fail on
Steering gear
- 2.4% fail on Steering rack
-
2.4% fail on
Steering linkage components
- 1.2% fail on Track rod end
- 1.2% fail on Locking devices
-
11% fail on
Body, chassis, structure
-
4.7% fail on
Integral vehicle structure
(2 times worse than other 1988 cars)
- 4.7% fail on Integral vehicle structure condition (2 times worse than other 1988 cars)
- 2.4% fail on Exhaust system
-
2.4% fail on
Fuel system
- 2.4% fail on Pipe (5 times worse than other 1988 cars)
-
1.2% fail on
Chassis
- 1.2% fail on Chassis condition
-
1.2% fail on
Body
- 1.2% fail on Other body component
-
1.2% fail on
Doors
-
1.2% fail on
Front passenger's door
- 1.2% fail on Door condition
-
1.2% fail on
Front passenger's door
-
4.7% fail on
Integral vehicle structure
(2 times worse than other 1988 cars)
-
9.4% fail on
Visibility
- 5.9% fail on Wipers
- 5.9% fail on Washers
-
1.2% fail on
View to rear
- 1.2% fail on Mirrors
-
1.2% fail on
Identification of the vehicle
- 1.2% fail on Registration plates
-
1.2% fail on
Speedometer and speed limiter
- 1.2% fail on Speedometer
-
1.2% fail on
Seat belts and supplementary restraint systems
-
1.2% fail on
Seat belts
- 1.2% fail on Prescribed areas
-
1.2% fail on
Seat belts
-
1.2% fail on
Tyres
- 1.2% fail on Condition