Bedford Rascal MOT Results
Registered in 198749.2% pass rate
from 63 tests in 2021
(73% worse than other 1987 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1987 cars and highlighted areas where the Bedford Rascal is unusually good or bad.
-
29% fail on
Lamps, reflectors and electrical equipment
(98% worse than other 1987 cars)
- 16% fail on Stop lamp (4 times worse than other 1987 cars)
-
6.3% fail on
Direction indicators
-
6.3% fail on
Flashing type
- 6.3% fail on Individual direction indicators
- 1.6% fail on Side repeaters
-
6.3% fail on
Flashing type
-
6.3% fail on
Front and rear fog lamps
-
6.3% fail on
Rear fog lamp
- 6.3% fail on Rear fog lamp
-
6.3% fail on
Rear fog lamp
-
4.8% fail on
Headlamp aim
- 4.8% fail on Headlamp aim
-
3.2% fail on
Headlamps
- 3.2% fail on Headlamp
-
3.2% fail on
Electrical equipment
- 3.2% fail on Horn
-
1.6% fail on
Hazard warning
- 1.6% fail on Switch
-
25% fail on
Brakes
(170% worse than other 1987 cars)
-
24% fail on
Brake performance
(2 times worse than other 1987 cars)
-
21% fail on
Service Brake Efficiency (sp)
(5 times worse than other 1987 cars)
-
19% fail on
Rbt (sp)
(5 times worse than other 1987 cars)
- 13% fail on Service brake performance (8 times worse than other 1987 cars)
- 9.5% fail on Service brake imbalance (4 times worse than other 1987 cars)
-
1.6% fail on
Plate brake tester (sp)
- 1.6% fail on Service brake performance
-
19% fail on
Rbt (sp)
(5 times worse than other 1987 cars)
-
13% fail on
Service brake performance
(3 times worse than other 1987 cars)
-
13% fail on
Rbt
(3 times worse than other 1987 cars)
- 13% fail on Service brake performance (4 times worse than other 1987 cars)
- 1.6% fail on Service brake imbalance
-
13% fail on
Rbt
(3 times worse than other 1987 cars)
-
3.2% fail on
Parking brake performance
-
3.2% fail on
Rbt
- 3.2% fail on Parking brake performance
-
3.2% fail on
Rbt
-
21% fail on
Service Brake Efficiency (sp)
(5 times worse than other 1987 cars)
-
4.8% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(14 times worse than other 1987 cars)
- 4.8% fail on Hydraulic brake cylinder (22 times worse than other 1987 cars)
-
1.6% fail on
Service brake pedal or hand lever
- 1.6% fail on Pedal
-
1.6% fail on
Air and vacuum systems
- 1.6% fail on Valves
-
1.6% fail on
Hydraulic systems
- 1.6% fail on Reservoirs
-
24% fail on
Brake performance
(2 times worse than other 1987 cars)
-
17% fail on
Body, chassis, structure
(140% worse than other 1987 cars)
-
6.3% fail on
Seats
(7 times worse than other 1987 cars)
- 6.3% fail on Driver's seat (9 times worse than other 1987 cars)
- 3.2% fail on Passenger's seat (7 times worse than other 1987 cars)
-
4.8% fail on
Integral vehicle structure
- 4.8% fail on Integral vehicle structure condition
- 3.2% fail on Exhaust system
-
3.2% fail on
Fuel system
- 3.2% fail on Pipe (8 times worse than other 1987 cars)
-
1.6% fail on
Transmission
-
1.6% fail on
Prop shafts
- 1.6% fail on Joints
-
1.6% fail on
Prop shafts
-
6.3% fail on
Seats
(7 times worse than other 1987 cars)
-
14% fail on
Visibility
- 7.9% fail on Wipers
- 7.9% fail on Washers
-
11% fail on
Noise, emissions and leaks
-
11% fail on
Exhaust emissions
-
11% fail on
Spark ignition
- 7.9% fail on Non catalyst emissions
- 3.2% fail on Emissions not tested (6 times worse than other 1987 cars)
-
11% fail on
Spark ignition
-
11% fail on
Exhaust emissions
-
9.5% fail on
Steering
-
4.8% fail on
Steering gear
- 4.8% fail on Steering rack (4 times worse than other 1987 cars)
- 3.2% fail on Prescribed areas (25 times worse than other 1987 cars)
-
1.6% fail on
Steering linkage components
- 1.6% fail on Intermediate drop arm
-
4.8% fail on
Steering gear
-
6.3% fail on
Suspension
- 3.2% fail on Component mounting prescribed areas
-
1.6% fail on
Springs
-
1.6% fail on
Leaf springs
- 1.6% fail on Shackle pins and bushes
-
1.6% fail on
Leaf springs
-
1.6% fail on
Anti-roll bars
- 1.6% fail on Linkage pins and bushes
-
1.6% fail on
Sub-frames
- 1.6% fail on Sub-frame mounting prescribed areas
-
4.8% fail on
Tyres
- 3.2% fail on Condition
- 1.6% fail on Tread depth
-
3.2% fail on
Identification of the vehicle
- 3.2% fail on Registration plates