Austin Mini MOT Results
Registered in 198674.1% pass rate
from 54 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1986 cars and highlighted areas where the Austin Mini is unusually good or bad.
-
19% fail on
Lamps, reflectors and electrical equipment
-
7.4% fail on
Headlamps
- 7.4% fail on Headlamp
-
5.6% fail on
Headlamp aim
- 3.7% fail on Headlamp aim
- 1.9% fail on Headlamp aim not tested
-
5.6% fail on
Electrical equipment
- 3.7% fail on Battery(ies) (5 times worse than other 1986 cars)
- 1.9% fail on Horn
- 3.7% fail on Registration plate lamp(s)
- 1.9% fail on Stop lamp
-
1.9% fail on
Front and rear fog lamps
-
1.9% fail on
Rear fog lamp
- 1.9% fail on Rear fog lamp
-
1.9% fail on
Rear fog lamp
-
1.9% fail on
Mandatory tell-tales
- 1.9% fail on Rear fog lamp tell-tale
-
7.4% fail on
Headlamps
-
17% fail on
Brakes
-
13% fail on
Brake performance
-
7.4% fail on
Service brake performance
-
7.4% fail on
Rbt
- 5.6% fail on Service brake performance
- 1.9% fail on Service brake imbalance
-
7.4% fail on
Rbt
-
7.4% fail on
Service Brake Efficiency (sp)
-
7.4% fail on
Rbt (sp)
- 3.7% fail on Service brake performance
- 3.7% fail on Service brake imbalance
-
7.4% fail on
Rbt (sp)
-
3.7% fail on
Parking brake efficiency (sp)
- 3.7% fail on Rbt (sp)
-
1.9% fail on
Parking brake performance
-
1.9% fail on
Rbt
- 1.9% fail on Parking brake performance
-
1.9% fail on
Rbt
-
7.4% fail on
Service brake performance
- 1.9% fail on Rigid brake pipes
- 1.9% fail on Flexible brake hoses
-
13% fail on
Brake performance
-
13% fail on
Suspension
- 9.3% fail on Component mounting prescribed areas (2 times worse than other 1986 cars)
-
7.4% fail on
Sub-frames
(14 times worse than other 1986 cars)
- 7.4% fail on Sub-frame mounting prescribed areas (24 times worse than other 1986 cars)
- 3.7% fail on Wheel bearings
-
1.9% fail on
Suspension arms
- 1.9% fail on Pins and bushes
-
1.9% fail on
Suspension rods
- 1.9% fail on Pins and bushes
-
1.9% fail on
Other suspension component
- 1.9% fail on Ball joint
-
7.4% fail on
Visibility
- 5.6% fail on Wipers
- 3.7% fail on Washers
-
7.4% fail on
Body, chassis, structure
-
1.9% fail on
Integral vehicle structure
- 1.9% fail on Integral vehicle structure condition
-
1.9% fail on
Chassis
- 1.9% fail on Chassis condition
- 1.9% fail on Exhaust system
-
1.9% fail on
Transmission
-
1.9% fail on
Drive shafts
- 1.9% fail on Joints
-
1.9% fail on
Drive shafts
-
1.9% fail on
Seats
- 1.9% fail on Driver's seat
-
1.9% fail on
Integral vehicle structure
-
7.4% fail on
Noise, emissions and leaks
-
7.4% fail on
Exhaust emissions
-
7.4% fail on
Spark ignition
- 7.4% fail on Non catalyst emissions
-
7.4% fail on
Spark ignition
-
7.4% fail on
Exhaust emissions
-
5.6% fail on
Steering
-
3.7% fail on
Steering gear
- 3.7% fail on Steering rack
-
1.9% fail on
Steering linkage components
- 1.9% fail on Track rod end
-
3.7% fail on
Steering gear
-
3.7% fail on
Identification of the vehicle
- 3.7% fail on Registration plates
-
3.7% fail on
Seat belts and supplementary restraint systems
-
3.7% fail on
Seat belts
- 3.7% fail on Prescribed areas
-
3.7% fail on
Seat belts
-
1.9% fail on
Tyres
- 1.9% fail on Condition