Austin Mini MOT Results
Registered in 198269.4% pass rate
from 111 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1982 cars and highlighted areas where the Austin Mini is unusually good or bad.
-
14% fail on
Lamps, reflectors and electrical equipment
- 4.5% fail on Registration plate lamp(s) (2 times worse than other 1982 cars)
-
3.6% fail on
Headlamps
- 3.6% fail on Headlamp
-
3.6% fail on
Direction indicators
-
3.6% fail on
Flashing type
- 2.7% fail on All direction indicators
- 0.90% fail on Individual direction indicators
-
3.6% fail on
Flashing type
- 2.7% fail on Stop lamp
-
1.8% fail on
Headlamp aim
- 1.8% fail on Headlamp aim
-
1.8% fail on
Front and rear fog lamps
-
1.8% fail on
Rear fog lamp
- 1.8% fail on Rear fog lamp
-
1.8% fail on
Rear fog lamp
-
0.90% fail on
Position lamps
- 0.90% fail on Position lamp
-
0.90% fail on
Electrical equipment
- 0.90% fail on Horn
-
9.9% fail on
Body, chassis, structure
- 3.6% fail on Exhaust system
-
3.6% fail on
Fuel system
- 2.7% fail on Tank (14 times worse than other 1982 cars)
- 0.90% fail on Hose
-
0.90% fail on
Integral vehicle structure
-
0.90% fail on
Sub-frame
- 0.90% fail on Sub-frame condition
- 0.90% fail on Integral vehicle structure condition
-
0.90% fail on
Sub-frame
-
0.90% fail on
Transmission
-
0.90% fail on
Drive shafts
- 0.90% fail on Joints
-
0.90% fail on
Drive shafts
-
0.90% fail on
Doors
-
0.90% fail on
Front passenger's door
- 0.90% fail on Door condition
-
0.90% fail on
Front passenger's door
-
0.90% fail on
Seats
- 0.90% fail on Passenger's seat
-
9.9% fail on
Noise, emissions and leaks
-
9.9% fail on
Exhaust emissions
-
9.9% fail on
Spark ignition
- 8.1% fail on Non catalyst emissions
- 0.90% fail on Catalyst emissions
- 0.90% fail on Emissions not tested
-
9.9% fail on
Spark ignition
-
0.90% fail on
Fluid leaks
- 0.90% fail on Engine oil leaks
-
9.9% fail on
Exhaust emissions
-
9.0% fail on
Visibility
- 5.4% fail on Washers
- 4.5% fail on Wipers
-
8.1% fail on
Brakes
-
7.2% fail on
Brake performance
-
6.3% fail on
Service Brake Efficiency (sp)
-
6.3% fail on
Rbt (sp)
- 4.5% fail on Service brake imbalance
- 2.7% fail on Service brake performance
-
6.3% fail on
Rbt (sp)
-
4.5% fail on
Parking brake efficiency (sp)
- 4.5% fail on Rbt (sp)
-
1.8% fail on
Service brake performance
-
1.8% fail on
Rbt
- 1.8% fail on Service brake performance
-
1.8% fail on
Rbt
-
6.3% fail on
Service Brake Efficiency (sp)
-
0.90% fail on
Service brake pedal or hand lever
- 0.90% fail on Pedal
-
0.90% fail on
Parking brake control
- 0.90% fail on Lever
-
7.2% fail on
Brake performance
-
5.4% fail on
Steering
-
2.7% fail on
Steering gear
- 2.7% fail on Steering rack
-
1.8% fail on
Steering linkage components
- 1.8% fail on Track rod end
- 0.90% fail on Ball joint
- 0.90% fail on Steering column
-
2.7% fail on
Steering gear
-
5.4% fail on
Suspension
-
2.7% fail on
Suspension arms
- 1.8% fail on Ball joint
- 0.90% fail on Pins and bushes
- 1.8% fail on Wheel bearings
- 1.8% fail on Component mounting prescribed areas
-
0.90% fail on
Other suspension component
- 0.90% fail on Ball joint dust cover
-
2.7% fail on
Suspension arms
-
1.8% fail on
Seat belts and supplementary restraint systems
-
1.8% fail on
Seat belts
- 1.8% fail on Prescribed areas
-
1.8% fail on
Seat belts
-
0.90% fail on
Identification of the vehicle
- 0.90% fail on Registration plates
-
0.90% fail on
Tyres
- 0.90% fail on Condition