Austin Mini MOT Results
Registered in 198173.1% pass rate
from 175 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1981 cars and highlighted areas where the Austin Mini is unusually good or bad.
-
14% fail on
Lamps, reflectors and electrical equipment
-
4.6% fail on
Direction indicators
-
4.6% fail on
Flashing type
- 2.9% fail on Individual direction indicators
- 1.7% fail on All direction indicators
-
4.6% fail on
Flashing type
-
4.0% fail on
Headlamps
- 4.0% fail on Headlamp
-
3.4% fail on
Headlamp aim
- 2.9% fail on Headlamp aim
- 0.57% fail on Headlamp aim not tested
- 2.9% fail on Stop lamp
-
2.9% fail on
Front and rear fog lamps
-
2.9% fail on
Rear fog lamp
- 2.9% fail on Rear fog lamp
-
2.9% fail on
Rear fog lamp
-
0.57% fail on
Electrical equipment
- 0.57% fail on Battery(ies)
-
4.6% fail on
Direction indicators
-
12% fail on
Brakes
-
9.1% fail on
Brake performance
-
6.3% fail on
Service Brake Efficiency (sp)
-
6.3% fail on
Rbt (sp)
- 4.6% fail on Service brake imbalance
- 1.7% fail on Service brake performance
-
6.3% fail on
Rbt (sp)
-
4.0% fail on
Service brake performance
-
3.4% fail on
Rbt
- 2.9% fail on Service brake performance
- 0.57% fail on Service brake imbalance
-
0.57% fail on
Plate brake tester
- 0.57% fail on Service brake performance
-
3.4% fail on
Rbt
-
3.4% fail on
Parking brake efficiency (sp)
- 3.4% fail on Rbt (sp)
-
1.1% fail on
Parking brake performance
-
1.1% fail on
Rbt
- 0.57% fail on Parking brake performance
- 0.57% fail on Parking (secondary brake performance)
-
1.1% fail on
Rbt
- 0.57% fail on Brake performance not tested
-
6.3% fail on
Service Brake Efficiency (sp)
-
1.1% fail on
Service brake pedal or hand lever
- 1.1% fail on Pedal
-
1.1% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.57% fail on Hydraulic brake callipers
- 0.57% fail on Hydraulic brake cylinder
-
0.57% fail on
Hydraulic systems
- 0.57% fail on Master cylinder
- 0.57% fail on Rigid brake pipes
- 0.57% fail on Flexible brake hoses
-
0.57% fail on
Mechanical brake components
-
0.57% fail on
Brake cables, rods, levers and linkages
- 0.57% fail on Cable
- 0.57% fail on Clevis joint
-
0.57% fail on
Brake cables, rods, levers and linkages
-
9.1% fail on
Brake performance
-
11% fail on
Noise, emissions and leaks
(92% worse than other 1981 cars)
-
11% fail on
Exhaust emissions
(100% worse than other 1981 cars)
-
11% fail on
Spark ignition
(110% worse than other 1981 cars)
- 10% fail on Non catalyst emissions (110% worse than other 1981 cars)
- 1.1% fail on Emissions not tested
-
11% fail on
Spark ignition
(110% worse than other 1981 cars)
-
11% fail on
Exhaust emissions
(100% worse than other 1981 cars)
-
8.6% fail on
Body, chassis, structure
- 2.9% fail on Exhaust system
-
2.9% fail on
Transmission
(2 times worse than other 1981 cars)
-
2.3% fail on
Drive shafts
(3 times worse than other 1981 cars)
- 2.3% fail on Joints (3 times worse than other 1981 cars)
-
0.57% fail on
Prop shafts
- 0.57% fail on Joints
-
2.3% fail on
Drive shafts
(3 times worse than other 1981 cars)
-
1.1% fail on
Integral vehicle structure
- 1.1% fail on Integral vehicle structure condition
-
1.1% fail on
Fuel system
- 1.1% fail on Fuel cap/sealing device
-
1.1% fail on
Seats
- 0.57% fail on Driver's seat
- 0.57% fail on Passenger's seat
-
0.57% fail on
Chassis
- 0.57% fail on Chassis condition
- 0.57% fail on Floor
-
8.0% fail on
Suspension
- 2.9% fail on Wheel bearings
-
2.9% fail on
Sub-frames
(8 times worse than other 1981 cars)
- 2.3% fail on Sub-frame mounting prescribed areas (7 times worse than other 1981 cars)
- 1.1% fail on Attachment bracket and mounting (18 times worse than other 1981 cars)
- 0.57% fail on Sub-frame
- 2.9% fail on Component mounting prescribed areas
-
1.1% fail on
Suspension arms
- 0.57% fail on Suspension arm
- 0.57% fail on Ball joint
-
0.57% fail on
Other suspension component
- 0.57% fail on Ball joint dust cover
-
4.6% fail on
Steering
-
2.3% fail on
Steering gear
- 2.3% fail on Steering rack
-
1.1% fail on
Steering linkage components
- 1.1% fail on Track rod end
- 1.1% fail on Steering wheel (11 times worse than other 1981 cars)
- 0.57% fail on Steering column
-
2.3% fail on
Steering gear
-
4.6% fail on
Visibility
- 2.9% fail on Washers
- 2.3% fail on Wipers
-
1.7% fail on
Identification of the vehicle
- 1.1% fail on Registration plates
- 0.57% fail on Vehicle Identification Number
-
1.1% fail on
Seat belts and supplementary restraint systems
-
1.1% fail on
Seat belts
- 1.1% fail on Prescribed areas
-
1.1% fail on
Seat belts
-
0.57% fail on
Road Wheels
- 0.57% fail on Condition
-
0.57% fail on
Tyres
- 0.57% fail on Tread depth