Austin Metro MOT Results
Registered in 198867.4% pass rate
from 46 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Austin Metro is unusually good or bad.
-
15% fail on
Lamps, reflectors and electrical equipment
-
4.3% fail on
Headlamp aim
- 4.3% fail on Headlamp aim
-
4.3% fail on
Hazard warning
(10 times worse than other 1988 cars)
- 4.3% fail on Switch (10 times worse than other 1988 cars)
-
2.2% fail on
Headlamps
- 2.2% fail on Headlamp
- 2.2% fail on Stop lamp
-
2.2% fail on
Direction indicators
-
2.2% fail on
Flashing type
- 2.2% fail on Individual direction indicators
-
2.2% fail on
Flashing type
-
2.2% fail on
Front and rear fog lamps
-
2.2% fail on
Rear fog lamp
- 2.2% fail on Rear fog lamp
-
2.2% fail on
Rear fog lamp
-
4.3% fail on
Headlamp aim
-
13% fail on
Brakes
-
11% fail on
Brake performance
-
6.5% fail on
Service Brake Efficiency (sp)
-
6.5% fail on
Rbt (sp)
- 6.5% fail on Service brake performance (3 times worse than other 1988 cars)
-
6.5% fail on
Rbt (sp)
-
4.3% fail on
Parking brake efficiency (sp)
- 4.3% fail on Rbt (sp)
- 2.2% fail on Brake performance not tested
-
6.5% fail on
Service Brake Efficiency (sp)
-
2.2% fail on
Service brake pedal or hand lever
- 2.2% fail on Pedal
-
2.2% fail on
Air and vacuum systems
- 2.2% fail on Servos
-
2.2% fail on
Parking brake control
- 2.2% fail on Lever
-
11% fail on
Brake performance
-
13% fail on
Visibility
- 8.7% fail on Wipers
- 4.3% fail on Washers
-
11% fail on
Suspension
-
2.2% fail on
Suspension arms
- 2.2% fail on Ball joint
-
2.2% fail on
Anti-roll bars
- 2.2% fail on Pins and bushes
-
2.2% fail on
Sub-frames
- 2.2% fail on Sub-frame mounting prescribed areas
-
2.2% fail on
Other suspension component
- 2.2% fail on Ball joint
-
2.2% fail on
Air/gas/fluid suspension
- 2.2% fail on Operation
-
2.2% fail on
Suspension arms
-
8.7% fail on
Body, chassis, structure
-
2.2% fail on
Chassis
- 2.2% fail on Chassis condition
- 2.2% fail on Exhaust system
-
2.2% fail on
Fuel system
- 2.2% fail on Pipe
-
2.2% fail on
Body
- 2.2% fail on Other body component
-
2.2% fail on
Chassis
-
8.7% fail on
Noise, emissions and leaks
-
8.7% fail on
Exhaust emissions
-
8.7% fail on
Spark ignition
- 8.7% fail on Non catalyst emissions
-
8.7% fail on
Spark ignition
-
8.7% fail on
Exhaust emissions
-
2.2% fail on
Steering
-
2.2% fail on
Steering linkage components
- 2.2% fail on Locking devices
-
2.2% fail on
Steering linkage components
-
2.2% fail on
Seat belts and supplementary restraint systems
-
2.2% fail on
Seat belts
- 2.2% fail on Prescribed areas
-
2.2% fail on
Seat belts
-
2.2% fail on
Road Wheels
- 2.2% fail on Condition