Audi S5 MOT Results
Registered in 201080.1% pass rate
from 301 tests in 2021
(42% better than other 2010 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Audi S5 is unusually good or bad.
-
6.6% fail on
Tyres
- 4.7% fail on Condition
- 1.3% fail on Tread depth
- 0.66% fail on Size/type
-
5.3% fail on
Suspension
(60% better than other 2010 cars)
-
2.3% fail on
Springs
-
2.3% fail on
Coil springs
- 2.3% fail on Coil spring
-
2.3% fail on
Coil springs
-
1.3% fail on
Suspension arms
- 1.00% fail on Pins and bushes
- 0.33% fail on Ball joint dust cover
- 0.66% fail on Wheel bearings
- 0.66% fail on Shock absorbers
-
0.33% fail on
Anti-roll bars
- 0.33% fail on Linkage
-
2.3% fail on
Springs
-
5.3% fail on
Noise, emissions and leaks
-
5.3% fail on
Exhaust emissions
-
5.3% fail on
Spark ignition
(160% worse than other 2010 cars)
- 4.3% fail on Malfunction indicator lamp (3 times worse than other 2010 cars)
- 1.3% fail on Catalyst emissions
-
5.3% fail on
Spark ignition
(160% worse than other 2010 cars)
-
5.3% fail on
Exhaust emissions
-
4.7% fail on
Lamps, reflectors and electrical equipment
(61% better than other 2010 cars)
-
2.0% fail on
Headlamp aim
- 1.7% fail on Headlamp aim
- 0.33% fail on Headlamp aim not tested
-
1.3% fail on
Headlamps
- 1.00% fail on Headlamp
- 0.33% fail on Headlamp cleaning device
- 1.00% fail on Registration plate lamp(s)
-
0.33% fail on
Direction indicators
-
0.33% fail on
Flashing type
- 0.33% fail on Side repeaters
-
0.33% fail on
Flashing type
-
0.33% fail on
Reversing lamps
- 0.33% fail on Reversing lamps
-
2.0% fail on
Headlamp aim
-
3.3% fail on
Brakes
(58% better than other 2010 cars)
-
2.0% fail on
Mechanical brake components
-
2.0% fail on
Brake linings and pads
- 2.0% fail on Brake pads
-
2.0% fail on
Brake linings and pads
-
1.00% fail on
Brake performance
(75% better than other 2010 cars)
-
0.66% fail on
Service brake performance
-
0.66% fail on
Rbt
- 0.66% fail on Service brake performance
-
0.66% fail on
Rbt
- 0.33% fail on Brake performance not tested
-
0.66% fail on
Service brake performance
-
0.33% fail on
ABS / EBS / ESC
- 0.33% fail on Anti-lock braking system
-
2.0% fail on
Mechanical brake components
-
3.0% fail on
Visibility
- 1.7% fail on Washers
- 1.3% fail on Wipers
-
1.3% fail on
Steering
-
0.66% fail on
Steering linkage components
- 0.66% fail on Track rod end
-
0.66% fail on
Steering play
(10 times worse than other 2010 cars)
- 0.66% fail on Steering rack (10 times worse than other 2010 cars)
-
0.66% fail on
Steering linkage components
-
0.66% fail on
Body, chassis, structure
(83% better than other 2010 cars)
- 0.33% fail on Exhaust system
-
0.33% fail on
Fuel system
- 0.33% fail on Fuel cap/sealing device
-
0.66% fail on
Road Wheels
- 0.66% fail on Condition
-
0.33% fail on
Identification of the vehicle
- 0.33% fail on Registration plates
-
0.33% fail on
Seat belts and supplementary restraint systems
- 0.33% fail on SRS malfunction indicator lamp