Audi S3 MOT Results
Registered in 201277.3% pass rate
from 176 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Audi S3 is unusually good or bad.
-
8.0% fail on
Suspension
-
6.3% fail on
Springs
-
6.3% fail on
Coil springs
- 6.3% fail on Coil spring
-
6.3% fail on
Coil springs
-
1.1% fail on
Anti-roll bars
- 0.57% fail on Linkage ball joints
- 0.57% fail on Linkage ball joint dust cover
-
0.57% fail on
Suspension arms
- 0.57% fail on Suspension arm
-
6.3% fail on
Springs
-
7.4% fail on
Lamps, reflectors and electrical equipment
-
3.4% fail on
Headlamp aim
- 3.4% fail on Headlamp aim
-
2.8% fail on
Direction indicators
-
2.8% fail on
Flashing type
- 1.7% fail on Side repeaters
- 1.1% fail on Individual direction indicators
-
2.8% fail on
Flashing type
-
0.57% fail on
Headlamps
- 0.57% fail on Headlamp
-
0.57% fail on
Front and rear fog lamps
-
0.57% fail on
Rear fog lamp
- 0.57% fail on Rear fog lamp
-
0.57% fail on
Rear fog lamp
- 0.57% fail on Registration plate lamp(s)
-
3.4% fail on
Headlamp aim
-
5.7% fail on
Noise, emissions and leaks
(180% worse than other 2012 cars)
-
5.7% fail on
Exhaust emissions
(190% worse than other 2012 cars)
-
5.7% fail on
Spark ignition
(3 times worse than other 2012 cars)
- 3.4% fail on Catalyst emissions (5 times worse than other 2012 cars)
- 1.7% fail on Malfunction indicator lamp
-
0.57% fail on
Emission control equipment
- 0.57% fail on Catalytic converter
- 0.57% fail on Emissions not tested
-
5.7% fail on
Spark ignition
(3 times worse than other 2012 cars)
-
0.57% fail on
Fluid leaks
- 0.57% fail on Engine oil leaks
-
5.7% fail on
Exhaust emissions
(190% worse than other 2012 cars)
-
4.5% fail on
Brakes
-
2.3% fail on
Mechanical brake components
-
2.3% fail on
Brake linings and pads
- 2.3% fail on Brake pads
-
2.3% fail on
Brake linings and pads
-
2.3% fail on
Brake performance
-
2.3% fail on
Service brake performance
-
2.3% fail on
Rbt
- 2.3% fail on Service brake performance
-
2.3% fail on
Rbt
-
2.3% fail on
Service brake performance
-
2.3% fail on
Mechanical brake components
-
3.4% fail on
Tyres
- 2.8% fail on Condition
- 1.1% fail on Tread depth
-
1.7% fail on
Identification of the vehicle
(4 times worse than other 2012 cars)
- 1.7% fail on Registration plates (4 times worse than other 2012 cars)
-
1.7% fail on
Visibility
- 1.1% fail on Washers
- 0.57% fail on Wipers
-
1.1% fail on
Body, chassis, structure
- 1.1% fail on Exhaust system
-
0.57% fail on
Transmission
-
0.57% fail on
Drive shafts
- 0.57% fail on Joints
-
0.57% fail on
Drive shafts
-
1.1% fail on
Seat belts and supplementary restraint systems
-
1.1% fail on
Seat belts
- 1.1% fail on Condition
-
1.1% fail on
Seat belts