Audi Quattro MOT Results

Registered in 1990
77.3% pass rate
from 66 tests in 2017
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the Audi Quattro is unusually good or bad.

  • 14% fail on Suspension
    • 6.1% fail on Suspension arms
      • 6.1% fail on Pins/bushes/ball joints
    • 3.0% fail on Coil springs
      • 3.0% fail on Condition
    • 3.0% fail on Drive shafts
      • 3.0% fail on Front drive shafts
        • 3.0% fail on Constant velocity joints
    • 1.5% fail on Sub-frames
      • 1.5% fail on Condition
    • 1.5% fail on Wheel bearings
      • 1.5% fail on Front
    • 1.5% fail on Front suspension joints
  • 9.1% fail on Brakes
    • 4.5% fail on Brake performance
      • 4.5% fail on Parking brake performance
      • 3.0% fail on Rear wheels
    • 3.0% fail on Parking brake
      • 3.0% fail on Condition
    • 3.0% fail on Hydraulic systems
      • 1.5% fail on Components
        • 1.5% fail on Hoses
      • 1.5% fail on Leaks
    • 3.0% fail on ABS (8 times worse than other 1990 cars)
  • 7.6% fail on Lamps, Reflectors and Electrical Equipment (63% better than other 1990 cars)
    • 4.5% fail on Headlamp aim
    • 3.0% fail on Stop lamp
    • 1.5% fail on Headlamps
      • 1.5% fail on Headlamp defects which don't require an aim check on retest
        • 1.5% fail on Main beam 'tell-tale'
  • 4.5% fail on Driver's view of the road
    • 4.5% fail on Washers
  • 3.0% fail on Exhaust, Fuel and Emissions
    • 1.5% fail on Exhaust system
    • 1.5% fail on Emissions
  • 1.5% fail on Tyres
    • 1.5% fail on Tread depth
  • 1.5% fail on Road Wheels
    • 1.5% fail on Attachment
  • 1.5% fail on Seat Belts and Supplementary Restraint Systems
    • 1.5% fail on Seat belts
      • 1.5% fail on Attachment
  • 1.5% fail on Body, Structure and General Items
    • 1.5% fail on Seats
      • 1.5% fail on Drivers

Search Good Garages