Audi Quattro MOT Results
Registered in 198668.3% pass rate
from 60 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1986 cars and highlighted areas where the Audi Quattro is unusually good or bad.
-
17% fail on
Lamps, reflectors and electrical equipment
-
5.0% fail on
Headlamp aim
- 5.0% fail on Headlamp aim
-
3.3% fail on
Direction indicators
-
3.3% fail on
Flashing type
- 1.7% fail on All direction indicators
- 1.7% fail on Side repeaters
-
3.3% fail on
Flashing type
-
3.3% fail on
Electrical equipment
- 3.3% fail on Horn
-
1.7% fail on
Headlamps
- 1.7% fail on Headlamp
- 1.7% fail on Stop lamp
- 1.7% fail on Registration plate lamp(s)
-
5.0% fail on
Headlamp aim
-
13% fail on
Brakes
-
5.0% fail on
ABS / EBS / ESC
(23 times worse than other 1986 cars)
- 5.0% fail on Anti-lock braking system (25 times worse than other 1986 cars)
- 3.3% fail on Flexible brake hoses (8 times worse than other 1986 cars)
-
3.3% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(8 times worse than other 1986 cars)
- 1.7% fail on Hydraulic brake callipers
- 1.7% fail on Hydraulic brake cylinder
-
1.7% fail on
Brake performance
-
1.7% fail on
Service brake performance
-
1.7% fail on
Rbt
- 1.7% fail on Service brake performance
-
1.7% fail on
Rbt
-
1.7% fail on
Service brake performance
-
5.0% fail on
ABS / EBS / ESC
(23 times worse than other 1986 cars)
-
8.3% fail on
Visibility
- 5.0% fail on Wipers
- 3.3% fail on Washers
- 1.7% fail on Bonnet
-
6.7% fail on
Noise, emissions and leaks
-
6.7% fail on
Exhaust emissions
-
6.7% fail on
Spark ignition
- 3.3% fail on Non catalyst emissions
- 1.7% fail on Catalyst emissions
- 1.7% fail on Emissions not tested
-
6.7% fail on
Spark ignition
-
6.7% fail on
Exhaust emissions
-
5.0% fail on
Suspension
-
3.3% fail on
Anti-roll bars
- 1.7% fail on Anti-roll bar
- 1.7% fail on Linkage
- 1.7% fail on Linkage pins and bushes
-
1.7% fail on
Suspension arms
- 1.7% fail on Pins and bushes
-
1.7% fail on
Suspension rods
- 1.7% fail on Ball joint dust cover
- 1.7% fail on Component mounting prescribed areas
-
3.3% fail on
Anti-roll bars
-
5.0% fail on
Body, chassis, structure
-
1.7% fail on
Integral vehicle structure
- 1.7% fail on Integral vehicle structure condition
-
1.7% fail on
Transmission
-
1.7% fail on
Drive shafts
- 1.7% fail on Joints
-
1.7% fail on
Drive shafts
-
1.7% fail on
Seats
- 1.7% fail on Driver's seat
-
1.7% fail on
Integral vehicle structure
-
1.7% fail on
Speedometer and speed limiter
- 1.7% fail on Speedometer
-
1.7% fail on
Seat belts and supplementary restraint systems
-
1.7% fail on
Seat belts
- 1.7% fail on Prescribed areas
-
1.7% fail on
Seat belts