Audi Coupe MOT Results

Registered in 1994
67.7% pass rate
from 96 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1994 cars and highlighted areas where the Audi Coupe is unusually good or bad.

  • 15% fail on Lamps, reflectors and electrical equipment
    • 5.2% fail on Direction indicators
      • 5.2% fail on Flashing type
        • 4.2% fail on Individual direction indicators
        • 1.0% fail on All direction indicators
    • 4.2% fail on Headlamp aim
      • 3.1% fail on Headlamp aim
      • 1.0% fail on Headlamp aim not tested
    • 3.1% fail on Stop lamp
    • 2.1% fail on Headlamps
      • 2.1% fail on Headlamp
    • 2.1% fail on Registration plate lamp(s)
    • 2.1% fail on Electrical equipment
      • 2.1% fail on Horn
    • 1.0% fail on Position lamps
      • 1.0% fail on Position lamp
  • 10% fail on Brakes
    • 6.3% fail on Brake performance
      • 3.1% fail on Service brake performance
        • 3.1% fail on Rbt
          • 3.1% fail on Service brake performance
          • 1.0% fail on Service brake imbalance
      • 3.1% fail on Parking brake efficiency (sp)
        • 2.1% fail on Decelerometer (sp) (7 times worse than other 1994 cars)
        • 1.0% fail on Rbt (sp)
    • 3.1% fail on Mechanical brake components
      • 2.1% fail on Brake cables, rods, levers and linkages (10 times worse than other 1994 cars)
        • 1.0% fail on Cable
        • 1.0% fail on Lever
      • 1.0% fail on Brake discs and drums
        • 1.0% fail on Brake discs
    • 2.1% fail on Flexible brake hoses
    • 2.1% fail on ABS / EBS / ESC
      • 2.1% fail on Anti-lock braking system
    • 1.0% fail on Hydraulic systems
      • 1.0% fail on Valves
    • 1.0% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.0% fail on Hydraulic brake callipers
    • 1.0% fail on Load sensing valves
  • 7.3% fail on Suspension
    • 4.2% fail on Suspension arms
      • 4.2% fail on Pins and bushes
      • 1.0% fail on Ball joint
    • 2.1% fail on Shock absorbers
    • 1.0% fail on Springs
      • 1.0% fail on Coil springs
        • 1.0% fail on Coil spring
    • 1.0% fail on Macpherson strut
      • 1.0% fail on Pins and bushes
    • 1.0% fail on Anti-roll bars
      • 1.0% fail on Linkage ball joints
    • 1.0% fail on Sub-frames
      • 1.0% fail on Pins and bushes
  • 6.3% fail on Body, chassis, structure
    • 2.1% fail on Transmission
      • 2.1% fail on Drive shafts
        • 2.1% fail on Joints
    • 1.0% fail on Exhaust system
    • 1.0% fail on Fuel system
      • 1.0% fail on Pipe
    • 1.0% fail on Bumpers
    • 1.0% fail on Doors
      • 1.0% fail on Front passenger's door
        • 1.0% fail on Catch
  • 6.3% fail on Noise, emissions and leaks
    • 6.3% fail on Exhaust emissions
      • 6.3% fail on Spark ignition
        • 5.2% fail on Catalyst emissions
        • 1.0% fail on Emissions not tested
    • 1.0% fail on Fluid leaks
      • 1.0% fail on Engine oil leaks
  • 5.2% fail on Visibility
    • 3.1% fail on Washers
    • 2.1% fail on Wipers
  • 3.1% fail on Tyres
    • 2.1% fail on Condition
    • 1.0% fail on Tread depth
  • 2.1% fail on Steering
    • 2.1% fail on Steering linkage components
      • 1.0% fail on Track rod end
      • 1.0% fail on Intermediate drop arm
  • 1.0% fail on Identification of the vehicle
    • 1.0% fail on Registration plates
  • 1.0% fail on Seat belts and supplementary restraint systems
    • 1.0% fail on SRS malfunction indicator lamp

Search Good Garages