MOT Results

Honest John Good Garage Guide MOT Results » Audi » Cabriolet » 2000

Audi Cabriolet MOT Results

Registered in 2000
64.9% pass rate
from 208 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Audi Cabriolet is unusually good or bad.

  • 15% fail on Suspension
    • 6.3% fail on Suspension arms
      • 4.3% fail on Pins and bushes (140% worse than other 2000 cars)
      • 1.4% fail on Ball joint dust cover
      • 0.48% fail on Attachment bracket and mounting
      • 0.48% fail on Ball joint
    • 6.3% fail on Anti-roll bars
      • 3.8% fail on Linkage ball joint dust cover (4 times worse than other 2000 cars)
      • 0.96% fail on Linkage ball joints
      • 0.48% fail on Anti-roll bar
      • 0.48% fail on Pins and bushes
      • 0.48% fail on Linkage
      • 0.48% fail on Ball joint
    • 1.4% fail on Springs
      • 1.4% fail on Coil springs
        • 1.4% fail on Coil spring
    • 1.4% fail on Shock absorbers
    • 1.4% fail on Sub-frames
      • 0.96% fail on Attachment bracket and mounting (51 times worse than other 2000 cars)
      • 0.48% fail on Sub-frame
    • 0.48% fail on Macpherson strut
      • 0.48% fail on Attachment bracket and mounting
    • 0.48% fail on Suspension rods
      • 0.48% fail on Attachment bracket and mounting
    • 0.48% fail on Other suspension component
      • 0.48% fail on Ball joint dust cover
  • 9.1% fail on Body, chassis, structure
    • 5.8% fail on Transmission
      • 5.8% fail on Drive shafts
        • 5.8% fail on Joints
    • 0.96% fail on Exhaust system
    • 0.96% fail on Fuel system
      • 0.96% fail on Pipe (6 times worse than other 2000 cars)
    • 0.48% fail on Doors
      • 0.48% fail on Front passenger's door
        • 0.48% fail on Door condition
    • 0.48% fail on Seats
      • 0.48% fail on Driver's seat
    • 0.48% fail on Boot lid
      • 0.48% fail on Boot lid condition
  • 8.7% fail on Visibility
    • 5.3% fail on Wipers
    • 3.4% fail on Washers
  • 7.7% fail on Lamps, reflectors and electrical equipment (47% better than other 2000 cars)
    • 2.4% fail on Front and rear fog lamps
      • 2.4% fail on Rear fog lamp
        • 2.4% fail on Rear fog lamp
    • 1.9% fail on Stop lamp
    • 1.9% fail on Direction indicators
      • 1.9% fail on Flashing type
        • 1.4% fail on Individual direction indicators
        • 1.4% fail on Side repeaters
    • 1.4% fail on Headlamps
      • 1.4% fail on Headlamp
    • 0.96% fail on Headlamp aim
      • 0.48% fail on Headlamp aim
      • 0.48% fail on Headlamp aim not tested
    • 0.96% fail on Electrical equipment
      • 0.96% fail on Battery(ies)
    • 0.48% fail on Position lamps
      • 0.48% fail on Position lamp
  • 7.2% fail on Noise, emissions and leaks
    • 7.2% fail on Exhaust emissions
      • 7.2% fail on Spark ignition
        • 6.3% fail on Catalyst emissions
        • 0.96% fail on Emissions not tested
  • 5.3% fail on Steering
    • 2.9% fail on Steering gear
      • 2.9% fail on Steering rack (200% worse than other 2000 cars)
    • 1.9% fail on Steering linkage components
      • 1.4% fail on Track rod end
      • 0.48% fail on Other components
        • 0.48% fail on Steering linkage
    • 0.48% fail on Power steering
      • 0.48% fail on Other components
    • 0.48% fail on Steering play
      • 0.48% fail on Steering rack
  • 4.3% fail on Brakes (67% better than other 2000 cars)
    • 2.9% fail on Brake performance (61% better than other 2000 cars)
      • 1.9% fail on Service brake performance
        • 1.9% fail on Rbt
          • 1.9% fail on Service brake performance
      • 0.48% fail on Service Brake Efficiency (sp)
        • 0.48% fail on Rbt (sp)
          • 0.48% fail on Service brake performance
      • 0.48% fail on Parking brake performance
        • 0.48% fail on Rbt
          • 0.48% fail on Parking brake performance
      • 0.48% fail on Parking brake efficiency (sp)
        • 0.48% fail on Rbt (sp)
    • 0.96% fail on Mechanical brake components
      • 0.96% fail on Brake discs and drums
        • 0.96% fail on Brake discs
    • 0.48% fail on Flexible brake hoses
    • 0.48% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.48% fail on Hydraulic brake callipers
  • 3.4% fail on Tyres
    • 1.9% fail on Condition
    • 1.4% fail on Tread depth
    • 0.48% fail on Size/type
  • 0.96% fail on Seat belts and supplementary restraint systems
    • 0.96% fail on SRS malfunction indicator lamp
  • 0.48% fail on Identification of the vehicle
    • 0.48% fail on Registration plates

Search Good Garages