Audi A6 Allroad MOT Results
Registered in 201075.5% pass rate
from 257 tests in 2021
(32% better than other 2010 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Audi A6 Allroad is unusually good or bad.
-
6.6% fail on
Lamps, reflectors and electrical equipment
(44% better than other 2010 cars)
-
3.1% fail on
Headlamp aim
- 2.3% fail on Headlamp aim
- 0.78% fail on Headlamp aim not tested
-
2.7% fail on
Headlamps
- 2.3% fail on Headlamp
- 0.39% fail on Headlamp levelling device
- 0.78% fail on Stop lamp
-
0.78% fail on
Direction indicators
-
0.78% fail on
Flashing type
- 0.78% fail on Individual direction indicators
-
0.78% fail on
Flashing type
- 0.78% fail on Registration plate lamp(s)
-
0.39% fail on
Electrical equipment
- 0.39% fail on Trailer electrical socket
-
3.1% fail on
Headlamp aim
-
6.2% fail on
Tyres
- 3.5% fail on Condition
- 2.7% fail on Tread depth
-
5.8% fail on
Body, chassis, structure
- 3.9% fail on Exhaust system (130% worse than other 2010 cars)
-
0.78% fail on
Transmission
-
0.78% fail on
Drive shafts
- 0.78% fail on Joints
-
0.78% fail on
Drive shafts
-
0.78% fail on
Body
(8 times worse than other 2010 cars)
- 0.39% fail on Panel
- 0.39% fail on Other body component
-
0.39% fail on
Seats
- 0.39% fail on Passenger's seat
-
3.9% fail on
Visibility
- 1.6% fail on Wipers
- 1.6% fail on Washers
-
0.39% fail on
Condition of glass
- 0.39% fail on Windscreen
-
0.39% fail on
View to rear
- 0.39% fail on Mirrors
-
3.9% fail on
Suspension
(71% better than other 2010 cars)
-
1.9% fail on
Anti-roll bars
- 1.2% fail on Linkage pins and bushes (8 times worse than other 2010 cars)
- 0.39% fail on Pins and bushes
- 0.39% fail on Linkage
-
1.6% fail on
Suspension arms
- 0.78% fail on Ball joint
- 0.39% fail on Pins and bushes
- 0.39% fail on Ball joint dust cover
-
0.39% fail on
Springs
-
0.39% fail on
Coil springs
- 0.39% fail on Coil spring
-
0.39% fail on
Coil springs
-
1.9% fail on
Anti-roll bars
-
3.5% fail on
Brakes
(56% better than other 2010 cars)
-
3.1% fail on
Mechanical brake components
-
1.9% fail on
Brake linings and pads
- 1.9% fail on Brake pads
-
1.9% fail on
Brake discs and drums
- 1.9% fail on Brake discs
-
1.9% fail on
Brake linings and pads
- 0.39% fail on Flexible brake hoses
-
3.1% fail on
Mechanical brake components
-
3.1% fail on
Noise, emissions and leaks
-
2.7% fail on
Exhaust emissions
-
1.9% fail on
Compression ignition
- 1.6% fail on Malfunction indicator lamp
- 0.39% fail on Emissions not tested
-
0.78% fail on
Spark ignition
- 0.78% fail on Malfunction indicator lamp
-
1.9% fail on
Compression ignition
-
0.39% fail on
Noise suppression
- 0.39% fail on Undertray
-
2.7% fail on
Exhaust emissions
-
2.7% fail on
Seat belts and supplementary restraint systems
(200% worse than other 2010 cars)
-
2.3% fail on
Seat belts
(4 times worse than other 2010 cars)
- 2.3% fail on Condition (5 times worse than other 2010 cars)
- 0.39% fail on SRS malfunction indicator lamp
-
2.3% fail on
Seat belts
(4 times worse than other 2010 cars)
-
0.39% fail on
Identification of the vehicle
- 0.39% fail on Registration plates
-
0.39% fail on
Steering
-
0.39% fail on
Steering linkage components
- 0.39% fail on Track rod end
-
0.39% fail on
Steering linkage components
-
0.39% fail on
Road Wheels
- 0.39% fail on Attachment