Audi 80 MOT Results
Registered in 199357.2% pass rate
from 285 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Audi 80 is unusually good or bad.
-
20% fail on
Lamps, Reflectors and Electrical Equipment
- 4.9% fail on Registration plate lamp
-
4.6% fail on
Position lamps
- 4.2% fail on Front lamps
- 0.35% fail on Rear lamps
- 3.9% fail on Headlamp aim
-
3.2% fail on
Rear fog lamp
- 3.2% fail on Fog lamp
-
3.2% fail on
Headlamps
- 2.8% fail on Headlamp
- 0.35% fail on Switch
- 2.8% fail on Stop lamp
-
2.8% fail on
Direction indicators
-
2.8% fail on
Flashing type
- 1.8% fail on Individual lamps
- 1.4% fail on Side repeaters
-
2.8% fail on
Flashing type
- 2.1% fail on Battery
- 0.70% fail on Horn
-
0.35% fail on
Hazard warning
- 0.35% fail on Switch
-
17% fail on
Suspension
-
7.7% fail on
Drive shafts
(160% worse than other 1993 cars)
-
7.4% fail on
Front drive shafts
(150% worse than other 1993 cars)
- 7.4% fail on Constant velocity joints (160% worse than other 1993 cars)
-
0.35% fail on
Any drive shaft which is part of the suspension
- 0.35% fail on Drive shafts
-
7.4% fail on
Front drive shafts
(150% worse than other 1993 cars)
-
3.9% fail on
Anti-roll bars
- 2.8% fail on Linkage pins/bushes/ball joints
- 1.1% fail on Pins/bushes/ball joints
-
3.2% fail on
Suspension arms
- 2.8% fail on Pins/bushes/ball joints
- 0.35% fail on Attachment
-
2.8% fail on
Macpherson strut
(11 times worse than other 1993 cars)
- 2.8% fail on Condition (11 times worse than other 1993 cars)
-
2.5% fail on
Shock absorbers
- 2.5% fail on Condition
-
1.8% fail on
Wheel bearings
- 1.8% fail on Rear
-
0.35% fail on
Bonded suspension
- 0.35% fail on Condition
-
0.35% fail on
Trailing arms
- 0.35% fail on Pins/bushes/ball joints
-
0.35% fail on
Sub-frames
- 0.35% fail on Pins/bushes/ball joints
- 0.35% fail on Front suspension joints
-
0.35% fail on
Prescribed areas
- 0.35% fail on Spring mounting
-
7.7% fail on
Drive shafts
(160% worse than other 1993 cars)
-
16% fail on
Brakes
-
10% fail on
Brake performance
- 6.7% fail on Parking brake performance (88% worse than other 1993 cars)
- 4.6% fail on Rear wheels
- 3.5% fail on Front wheels
- 0.35% fail on Service brake performance
-
6.0% fail on
Hydraulic systems
-
5.6% fail on
Components
- 5.3% fail on Hoses (2 times worse than other 1993 cars)
- 0.35% fail on Valves
- 0.35% fail on Leaks
-
5.6% fail on
Components
-
3.5% fail on
Hub components
- 2.1% fail on Brake pads
- 1.4% fail on Brake discs
-
1.1% fail on
Mechanical components
- 1.1% fail on Cable (4 times worse than other 1993 cars)
-
0.70% fail on
Parking brake
- 0.70% fail on Condition
-
0.35% fail on
Air and vacuum systems
- 0.35% fail on Pressure/vacuum build up
- 0.35% fail on ABS
- 0.35% fail on Restricted movement
-
10% fail on
Brake performance
-
12% fail on
Exhaust, Fuel and Emissions
- 5.3% fail on Emissions
- 4.6% fail on Exhaust system
-
2.8% fail on
Fuel system
- 1.4% fail on Pipe (2 times worse than other 1993 cars)
- 0.35% fail on Tank
- 0.35% fail on Hose
- 0.35% fail on Cap
- 0.35% fail on System
- 1.8% fail on Emissions not tested
-
7.7% fail on
Tyres
- 5.3% fail on Tread depth (120% worse than other 1993 cars)
- 2.8% fail on Condition
-
5.3% fail on
Driver's view of the road
- 3.2% fail on Wipers
- 2.1% fail on Washers
-
4.9% fail on
Steering
-
3.9% fail on
Steering system
- 2.1% fail on Track rod end
- 1.8% fail on Steering rack
- 0.35% fail on Steering arm
-
0.35% fail on
Steering control
- 0.35% fail on Steering column
-
0.35% fail on
Power steering
- 0.35% fail on Other components
- 0.35% fail on Locking devices
-
3.9% fail on
Steering system
-
1.8% fail on
Body, Structure and General Items
(67% better than other 1993 cars)
- 1.8% fail on Body condition
-
0.70% fail on
Registration plates and VIN
- 0.70% fail on Registration plate
-
0.35% fail on
Road Wheels
- 0.35% fail on Condition