Audi 80 MOT Results

Registered in 1990

58.3% pass rate

from 36 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the Audi 80 is unusually good or bad.

19% fail on Brakes
- 8.3% fail on Brake performance
  - 8.3% fail on Service brake performance
    - 8.3% fail on Rbt
      - 5.6% fail on Service brake imbalance (8 times worse than other 1990 cars)
      - 2.8% fail on Service brake performance
  - 5.6% fail on Service Brake Efficiency (sp)
    - 5.6% fail on Rbt (sp)
      - 5.6% fail on Service brake imbalance
- 2.8% fail on Service brake pedal or hand lever
  - 2.8% fail on Hand lever
- 2.8% fail on Hydraulic systems
  - 2.8% fail on Brake fluid
- 2.8% fail on Rigid brake pipes
- 2.8% fail on Flexible brake hoses
- 2.8% fail on Load sensing valves
14% fail on Lamps, reflectors and electrical equipment
- 8.3% fail on Front and rear fog lamps
  - 8.3% fail on Rear fog lamp
    - 8.3% fail on Rear fog lamp
- 5.6% fail on Direction indicators
  - 5.6% fail on Flashing type
    - 5.6% fail on Side repeaters
- 2.8% fail on Headlamp aim
  - 2.8% fail on Headlamp aim
- 2.8% fail on Registration plate lamp(s)
- 2.8% fail on Mandatory tell-tales
  - 2.8% fail on Rear fog lamp tell-tale
11% fail on Visibility
- 8.3% fail on Washers
- 2.8% fail on Wipers
11% fail on Body, chassis, structure
- 8.3% fail on Transmission
  - 8.3% fail on Drive shafts (3 times worse than other 1990 cars)
    - 8.3% fail on Joints (3 times worse than other 1990 cars)
- 2.8% fail on Exhaust system
- 2.8% fail on Bumpers
8.3% fail on Noise, emissions and leaks
- 8.3% fail on Exhaust emissions
  - 8.3% fail on Spark ignition
    - 5.6% fail on Catalyst emissions (9 times worse than other 1990 cars)
    - 2.8% fail on Non catalyst emissions
5.6% fail on Suspension
- 2.8% fail on Shock absorbers
- 2.8% fail on Suspension arms
  - 2.8% fail on Pins and bushes
- 2.8% fail on Anti-roll bars
  - 2.8% fail on Linkage ball joints
2.8% fail on Steering
- 2.8% fail on Steering linkage components
  - 2.8% fail on Track rod end
2.8% fail on Road Wheels
- 2.8% fail on Attachment
2.8% fail on Tyres
- 2.8% fail on Size/type