MOT Results

Honest John Good Garage Guide MOT Results » Alfa Romeo » Spider » 1990

Alfa Romeo Spider MOT Results

Registered in 1990
72.4% pass rate
from 76 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the Alfa Romeo Spider is unusually good or bad.

  • 12% fail on Lamps, reflectors and electrical equipment
    • 2.6% fail on Headlamps
      • 2.6% fail on Headlamp
    • 2.6% fail on Headlamp aim
      • 2.6% fail on Headlamp aim
    • 2.6% fail on Stop lamp
    • 2.6% fail on Direction indicators
      • 2.6% fail on Flashing type
        • 2.6% fail on Individual direction indicators
    • 2.6% fail on Front and rear fog lamps
      • 2.6% fail on Rear fog lamp
        • 2.6% fail on Rear fog lamp
  • 9.2% fail on Visibility
    • 7.9% fail on Washers
    • 2.6% fail on Wipers
  • 7.9% fail on Body, chassis, structure
    • 3.9% fail on Fuel system (3 times worse than other 1990 cars)
      • 2.6% fail on Fuel cap/sealing device (9 times worse than other 1990 cars)
      • 1.3% fail on Pipe
    • 1.3% fail on Integral vehicle structure
      • 1.3% fail on Integral vehicle structure condition
    • 1.3% fail on Exhaust system
    • 1.3% fail on Seats
      • 1.3% fail on Driver's seat
  • 6.6% fail on Brakes
    • 5.3% fail on Brake performance
      • 3.9% fail on Service brake performance
        • 3.9% fail on Rbt
          • 3.9% fail on Service brake performance
      • 1.3% fail on Service Brake Efficiency (sp)
        • 1.3% fail on Rbt (sp)
          • 1.3% fail on Service brake performance
      • 1.3% fail on Parking brake performance
        • 1.3% fail on Rbt
          • 1.3% fail on Parking brake performance
      • 1.3% fail on Parking brake efficiency (sp)
        • 1.3% fail on Rbt (sp)
    • 1.3% fail on Mechanical brake components
      • 1.3% fail on Brake linings and pads
        • 1.3% fail on Brake pads
  • 5.3% fail on Suspension
    • 2.6% fail on Anti-roll bars
      • 1.3% fail on Attachment bracket and mounting
      • 1.3% fail on Linkage ball joints
    • 1.3% fail on Springs
      • 1.3% fail on Coil springs
        • 1.3% fail on Coil spring
    • 1.3% fail on Suspension rods
      • 1.3% fail on Pins and bushes
    • 1.3% fail on Component mounting prescribed areas
  • 3.9% fail on Steering
    • 2.6% fail on Steering linkage components
      • 1.3% fail on Drag link end
      • 1.3% fail on Locking devices
    • 1.3% fail on Prescribed areas
  • 1.3% fail on Identification of the vehicle
    • 1.3% fail on Registration plates
  • 1.3% fail on Noise, emissions and leaks
    • 1.3% fail on Exhaust emissions
      • 1.3% fail on Spark ignition
        • 1.3% fail on Non catalyst emissions

Search Good Garages