Alfa Romeo 159 MOT Results
Registered in 201261.5% pass rate
from 104 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Alfa Romeo 159 is unusually good or bad.
-
19% fail on
Suspension
(110% worse than other 2012 cars)
-
15% fail on
Springs
(2 times worse than other 2012 cars)
-
15% fail on
Coil springs
(2 times worse than other 2012 cars)
- 15% fail on Coil spring (2 times worse than other 2012 cars)
-
15% fail on
Coil springs
(2 times worse than other 2012 cars)
-
1.9% fail on
Suspension arms
- 1.9% fail on Ball joint
-
1.9% fail on
Anti-roll bars
- 1.9% fail on Linkage ball joints
-
0.96% fail on
Macpherson strut
- 0.96% fail on Macpherson strut
-
0.96% fail on
Sub-frames
- 0.96% fail on Sub-frame
-
15% fail on
Springs
(2 times worse than other 2012 cars)
-
9.6% fail on
Lamps, reflectors and electrical equipment
-
5.8% fail on
Headlamps
- 5.8% fail on Headlamp
-
2.9% fail on
Headlamp aim
- 2.9% fail on Headlamp aim
-
0.96% fail on
Direction indicators
-
0.96% fail on
Flashing type
- 0.96% fail on Side repeaters
-
0.96% fail on
Flashing type
-
0.96% fail on
Electrical equipment
- 0.96% fail on Trailer electrical socket
-
5.8% fail on
Headlamps
-
7.7% fail on
Brakes
-
6.7% fail on
Brake performance
-
4.8% fail on
Parking brake efficiency (sp)
(3 times worse than other 2012 cars)
- 4.8% fail on Rbt (sp) (4 times worse than other 2012 cars)
-
2.9% fail on
Service brake performance
-
2.9% fail on
Rbt
- 1.9% fail on Service brake performance
- 0.96% fail on Service brake imbalance
-
2.9% fail on
Rbt
-
0.96% fail on
Parking brake performance
-
0.96% fail on
Rbt
- 0.96% fail on Parking brake performance
- 0.96% fail on Parking (secondary brake performance)
-
0.96% fail on
Rbt
-
4.8% fail on
Parking brake efficiency (sp)
(3 times worse than other 2012 cars)
-
1.9% fail on
Mechanical brake components
-
0.96% fail on
Brake linings and pads
- 0.96% fail on Brake pads
-
0.96% fail on
Brake discs and drums
- 0.96% fail on Brake discs
-
0.96% fail on
Brake cables, rods, levers and linkages
- 0.96% fail on Cable
-
0.96% fail on
Brake linings and pads
-
6.7% fail on
Brake performance
-
7.7% fail on
Noise, emissions and leaks
(2 times worse than other 2012 cars)
-
7.7% fail on
Exhaust emissions
(2 times worse than other 2012 cars)
-
4.8% fail on
Compression ignition
(5 times worse than other 2012 cars)
- 2.9% fail on Malfunction indicator lamp (6 times worse than other 2012 cars)
- 1.9% fail on On or after 01/07/2008 (7 times worse than other 2012 cars)
-
2.9% fail on
Spark ignition
- 1.9% fail on Malfunction indicator lamp
- 0.96% fail on Catalyst emissions
-
4.8% fail on
Compression ignition
(5 times worse than other 2012 cars)
-
7.7% fail on
Exhaust emissions
(2 times worse than other 2012 cars)
-
5.8% fail on
Tyres
- 3.8% fail on Condition
- 2.9% fail on Tread depth
-
3.8% fail on
Visibility
- 1.9% fail on Washers
-
0.96% fail on
Condition of glass
- 0.96% fail on Windscreen
- 0.96% fail on Wipers
-
3.8% fail on
Body, chassis, structure
- 0.96% fail on Exhaust system
-
0.96% fail on
Transmission
-
0.96% fail on
Drive shafts
- 0.96% fail on Joints
-
0.96% fail on
Drive shafts
-
0.96% fail on
Doors
-
0.96% fail on
Other passenger's door
- 0.96% fail on Door condition
-
0.96% fail on
Other passenger's door
-
0.96% fail on
Seats
- 0.96% fail on Passenger's seat
-
0.96% fail on
Identification of the vehicle
- 0.96% fail on Registration plates
-
0.96% fail on
Seat belts and supplementary restraint systems
- 0.96% fail on SRS malfunction indicator lamp