Vauxhall Vectra sensor problem
The cam sensor went on my Vectra and backfired through the air filter.
I've changed the cam sensor and I've got a spark but no fuel to the engine. Is there a reset for fuel pump?
I've changed the cam sensor and I've got a spark but no fuel to the engine. Is there a reset for fuel pump?
Asked on 18 March 2011 by neil03
Answered by
Alan Ross
If you have suffered a backfire in to the intake manifold then it may be that you have damaged the MAF sensor, which also has the engine temp sensor fitted to it.You may be able to clean the sensor with electronics cleaner(aerosol),don't use anything else.
If not possible then you may have to look at replacing
If not possible then you may have to look at replacing
Tags:
sensors
technical issues
Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.
The Good Garage GuideSimilar questions
I have a 2002 Vectra 2.2 SRI 150. The previous owner had replaced middle box of exauhst with a straight through pipe so I had to replace the cat after a month, because he stuck gunk on instead of replacing...
I recently changed the intercooler on my 2010 Jaguar XF and now I'm getting an intermittent warning message which reads 'water in fuel, consult handbook.' How do I get rid of this message?
My Ford Focus 1.6 TDCi runs fine for 35 - 40 miles, then cuts out as if the ignition was turned off. When I stop and turn off the ignition and then restart it then it runs fine. This is a repeating problem....
Elsewhere on 
.jpg)
