Toyota Camry MOT Results
Registered in 199654.2% pass rate
from 24 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Toyota Camry is unusually good or bad.
-
21% fail on
Brakes
- 8.3% fail on Rigid brake pipes
-
8.3% fail on
Mechanical brake components
-
8.3% fail on
Brake linings and pads
(7 times worse than other 1996 cars)
- 8.3% fail on Brake pads (7 times worse than other 1996 cars)
-
4.2% fail on
Brake discs and drums
- 4.2% fail on Brake discs
-
8.3% fail on
Brake linings and pads
(7 times worse than other 1996 cars)
-
8.3% fail on
Brake performance
-
8.3% fail on
Service brake performance
-
8.3% fail on
Rbt
- 4.2% fail on Service brake performance
- 4.2% fail on Service brake imbalance
-
8.3% fail on
Rbt
-
8.3% fail on
Service brake performance
-
21% fail on
Lamps, reflectors and electrical equipment
-
13% fail on
Headlamp aim
- 13% fail on Headlamp aim
-
4.2% fail on
Direction indicators
-
4.2% fail on
Flashing type
- 4.2% fail on Individual direction indicators
-
4.2% fail on
Flashing type
-
4.2% fail on
Front and rear fog lamps
-
4.2% fail on
Rear fog lamp
- 4.2% fail on Rear fog lamp
-
4.2% fail on
Rear fog lamp
-
13% fail on
Headlamp aim
-
13% fail on
Body, chassis, structure
-
13% fail on
Transmission
(4 times worse than other 1996 cars)
-
13% fail on
Drive shafts
(4 times worse than other 1996 cars)
- 13% fail on Joints (4 times worse than other 1996 cars)
-
13% fail on
Drive shafts
(4 times worse than other 1996 cars)
- 4.2% fail on Exhaust system
-
13% fail on
Transmission
(4 times worse than other 1996 cars)
-
13% fail on
Noise, emissions and leaks
-
13% fail on
Exhaust emissions
-
13% fail on
Spark ignition
- 13% fail on Catalyst emissions
-
13% fail on
Spark ignition
-
13% fail on
Exhaust emissions
-
4.2% fail on
Identification of the vehicle
- 4.2% fail on Registration plates
-
4.2% fail on
Visibility
- 4.2% fail on Wipers
-
4.2% fail on
Suspension
-
4.2% fail on
Anti-roll bars
- 4.2% fail on Linkage ball joints
-
4.2% fail on
Anti-roll bars
-
4.2% fail on
Tyres
- 4.2% fail on Condition