Santana Anibal PS-10 MOT Results
Registered in 200670.4% pass rate
from 27 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2006 cars and highlighted areas where the Santana Anibal PS-10 is unusually good or bad.
-
19% fail on
Lamps, reflectors and electrical equipment
-
11% fail on
Direction indicators
-
11% fail on
Flashing type
- 11% fail on Side repeaters (14 times worse than other 2006 cars)
- 3.7% fail on Individual direction indicators
-
11% fail on
Flashing type
-
3.7% fail on
Headlamps
- 3.7% fail on Headlamp
-
3.7% fail on
Headlamp aim
- 3.7% fail on Headlamp aim not tested
- 3.7% fail on Stop lamp
-
3.7% fail on
Front and rear fog lamps
-
3.7% fail on
Rear fog lamp
- 3.7% fail on Rear fog lamp
-
3.7% fail on
Rear fog lamp
- 3.7% fail on Rear reflectors
-
3.7% fail on
Mandatory tell-tales
- 3.7% fail on Main beam tell-tale
-
11% fail on
Direction indicators
-
11% fail on
Visibility
- 11% fail on Wipers
- 3.7% fail on Washers
-
7.4% fail on
Steering
-
7.4% fail on
Steering linkage components
- 3.7% fail on Ball joint
- 3.7% fail on Track rod end
-
7.4% fail on
Steering linkage components
-
7.4% fail on
Suspension
- 3.7% fail on Shock absorbers
- 3.7% fail on Component mounting prescribed areas
-
7.4% fail on
Body, chassis, structure
-
3.7% fail on
Chassis
- 3.7% fail on Chassis condition
-
3.7% fail on
Fuel system
- 3.7% fail on Fuel cap/sealing device
-
3.7% fail on
Chassis
-
7.4% fail on
Seat belts and supplementary restraint systems
-
7.4% fail on
Seat belts
(5 times worse than other 2006 cars)
- 3.7% fail on Prescribed areas
- 3.7% fail on Condition
-
7.4% fail on
Seat belts
(5 times worse than other 2006 cars)
-
3.7% fail on
Brakes
-
3.7% fail on
Other components and prescribed areas
-
3.7% fail on
Prescribed areas
- 3.7% fail on Master cylinder/servo mounting
-
3.7% fail on
Prescribed areas
-
3.7% fail on
Mechanical brake components
-
3.7% fail on
Brake linings and pads
- 3.7% fail on Brake pads
-
3.7% fail on
Brake linings and pads
-
3.7% fail on
Brake performance
-
3.7% fail on
Parking brake efficiency (sp)
- 3.7% fail on Decelerometer (sp)
-
3.7% fail on
Parking brake efficiency (sp)
-
3.7% fail on
Other components and prescribed areas
-
3.7% fail on
Noise, emissions and leaks
-
3.7% fail on
Fluid leaks
- 3.7% fail on Transmission oil leaks
-
3.7% fail on
Fluid leaks
-
3.7% fail on
Buses and coaches supplementary tests
-
3.7% fail on
Doors
- 3.7% fail on Emergency exits
-
3.7% fail on
Doors
-
3.7% fail on
Tyres
- 3.7% fail on Condition