Proton Wira MOT Results
Registered in 200152.9% pass rate
from 87 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Proton Wira is unusually good or bad.
-
26% fail on
Lamps, Reflectors and Electrical Equipment
-
14% fail on
Position lamps
- 8.0% fail on Front lamps
- 4.6% fail on Rear lamps
- 1.1% fail on All position lamps
- 6.9% fail on Stop lamp
-
6.9% fail on
Direction indicators
-
6.9% fail on
Flashing type
- 5.7% fail on Individual lamps
- 1.1% fail on All direction indicators
-
6.9% fail on
Flashing type
- 2.3% fail on Headlamp aim
- 1.1% fail on Battery
- 1.1% fail on Registration plate lamp
-
1.1% fail on
Headlamps
- 1.1% fail on Headlamp
- 1.1% fail on Horn
-
14% fail on
Position lamps
-
23% fail on
Brakes
-
15% fail on
Brake performance
- 6.9% fail on Rear wheels
- 6.9% fail on Parking brake performance
- 5.7% fail on Front wheels
- 2.3% fail on Service brake performance
- 1.1% fail on Brake imbalance
- 1.1% fail on Brake performance not tested
-
4.6% fail on
Parking brake
(3 times worse than other 2001 cars)
- 4.6% fail on Condition (3 times worse than other 2001 cars)
-
3.4% fail on
Hydraulic systems
-
3.4% fail on
Components
- 3.4% fail on Pipes
- 1.1% fail on Leaks
-
3.4% fail on
Components
-
2.3% fail on
Hub components
- 2.3% fail on Brake pads
-
15% fail on
Brake performance
-
10% fail on
Steering
-
8.0% fail on
Steering system
- 8.0% fail on Steering rack (7 times worse than other 2001 cars)
-
2.3% fail on
Power steering
- 1.1% fail on Pipes and hoses
- 1.1% fail on Rams
-
8.0% fail on
Steering system
-
10% fail on
Suspension
(53% better than other 2001 cars)
-
4.6% fail on
Anti-roll bars
- 3.4% fail on Linkage pins/bushes/ball joints
- 1.1% fail on Linkage condition
-
2.3% fail on
Suspension arms
- 2.3% fail on Pins/bushes/ball joints
-
2.3% fail on
Prescribed areas
- 2.3% fail on Component mounting
-
1.1% fail on
Trailing arms
- 1.1% fail on Pins/bushes/ball joints
-
1.1% fail on
Tie bars/rods
- 1.1% fail on Pins/bushes/ball joints
-
4.6% fail on
Anti-roll bars
-
10% fail on
Tyres
- 5.7% fail on Condition
- 5.7% fail on Tread depth
- 1.1% fail on Valve stem
-
8.0% fail on
Exhaust, Fuel and Emissions
- 3.4% fail on Exhaust system
- 3.4% fail on Emissions
-
1.1% fail on
Fuel system
- 1.1% fail on Hose
- 1.1% fail on Emissions not tested
-
5.7% fail on
Driver's view of the road
- 4.6% fail on Wipers
- 2.3% fail on Washers
-
2.3% fail on
Body, Structure and General Items
- 1.1% fail on Body security
- 1.1% fail on Body condition
-
1.1% fail on
Seat Belts and Supplementary Restraint Systems
-
1.1% fail on
Seat belts
- 1.1% fail on Prescribed areas
-
1.1% fail on
Seat belts