Proton Wira MOT Results

Registered in 2000
56.3% pass rate
from 64 tests in 2017
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Proton Wira is unusually good or bad.

  • 19% fail on Lamps, Reflectors and Electrical Equipment
    • 6.3% fail on Registration plate lamp
    • 6.3% fail on Stop lamp
    • 6.3% fail on Headlamp aim
    • 1.6% fail on Battery
    • 1.6% fail on Position lamps
      • 1.6% fail on Front lamps
    • 1.6% fail on Rear fog lamp
      • 1.6% fail on Fog lamp
    • 1.6% fail on Headlamps
      • 1.6% fail on Headlamp
    • 1.6% fail on Direction indicators
      • 1.6% fail on Flashing type
        • 1.6% fail on All direction indicators
    • 1.6% fail on Hazard warning
      • 1.6% fail on Lamp
    • 1.6% fail on Horn
  • 17% fail on Brakes
    • 11% fail on Brake performance
      • 4.7% fail on Parking brake performance
      • 3.1% fail on Front wheels
      • 3.1% fail on Service brake performance
      • 1.6% fail on Brake imbalance
      • 1.6% fail on Rear wheels
    • 6.3% fail on Hydraulic systems
      • 6.3% fail on Components
        • 6.3% fail on Pipes
      • 1.6% fail on Leaks
    • 3.1% fail on Parking brake
      • 3.1% fail on Condition
    • 1.6% fail on ABS
    • 1.6% fail on Hub components
      • 1.6% fail on Brake pads
  • 13% fail on Steering (170% worse than other 2000 cars)
    • 11% fail on Steering system (170% worse than other 2000 cars)
      • 9.4% fail on Steering rack (8 times worse than other 2000 cars)
      • 1.6% fail on Track rod end
    • 1.6% fail on Power steering
      • 1.6% fail on Operation
  • 11% fail on Exhaust, Fuel and Emissions
    • 7.8% fail on Exhaust system
    • 7.8% fail on Emissions
    • 1.6% fail on Emissions not tested
  • 7.8% fail on Suspension (64% better than other 2000 cars)
    • 3.1% fail on Anti-roll bars
      • 1.6% fail on Linkage pins/bushes/ball joints
      • 1.6% fail on Pins/bushes/ball joints
    • 1.6% fail on Trailing arms
      • 1.6% fail on Pins/bushes/ball joints
    • 1.6% fail on Radius arms
      • 1.6% fail on Pins/bushes/ball joints
    • 1.6% fail on Wheel bearings
      • 1.6% fail on Rear
    • 1.6% fail on Prescribed areas
      • 1.6% fail on Subframe mounting
  • 7.8% fail on Tyres
    • 6.3% fail on Tread depth
    • 1.6% fail on Condition
  • 7.8% fail on Driver's view of the road
    • 6.3% fail on Wipers
    • 1.6% fail on Washers
  • 3.1% fail on Seat Belts and Supplementary Restraint Systems
    • 3.1% fail on Supplementary restraint systems
      • 3.1% fail on SRS Malfunction Indicator Lamp
  • 1.6% fail on Road Wheels
    • 1.6% fail on Attachment
  • 1.6% fail on Body, Structure and General Items
    • 1.6% fail on Engine mountings

Search Good Garages