Peugeot Expert Tepee MOT Results
Registered in 201062.5% pass rate
from 72 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Peugeot Expert Tepee is unusually good or bad.
-
25% fail on
Lamps, Reflectors and Electrical Equipment
(87% worse than other 2010 cars)
- 9.7% fail on Registration plate lamp (170% worse than other 2010 cars)
- 6.9% fail on Stop lamp
- 6.9% fail on Headlamp aim
-
4.2% fail on
Position lamps
- 4.2% fail on Front lamps
-
4.2% fail on
Headlamps
- 4.2% fail on Headlamp
- 1.4% fail on Horn
-
8.3% fail on
Suspension
-
4.2% fail on
Drive shafts
(4 times worse than other 2010 cars)
-
4.2% fail on
Front drive shafts
(4 times worse than other 2010 cars)
- 4.2% fail on Constant velocity joints (4 times worse than other 2010 cars)
-
4.2% fail on
Front drive shafts
(4 times worse than other 2010 cars)
-
2.8% fail on
Anti-roll bars
- 2.8% fail on Linkage pins/bushes/ball joints
-
1.4% fail on
Suspension arms
- 1.4% fail on Pins/bushes/ball joints
- 1.4% fail on Attachment
-
1.4% fail on
Panhard rods
- 1.4% fail on Attachment
-
4.2% fail on
Drive shafts
(4 times worse than other 2010 cars)
-
8.3% fail on
Driver's view of the road
- 4.2% fail on Wipers
- 2.8% fail on Washers
- 1.4% fail on Windscreen
-
5.6% fail on
Tyres
- 2.8% fail on Condition
- 2.8% fail on Tread depth
-
5.6% fail on
Exhaust, Fuel and Emissions
(2 times worse than other 2010 cars)
- 4.2% fail on Exhaust system (3 times worse than other 2010 cars)
-
1.4% fail on
Fuel system
- 1.4% fail on Tank
-
1.4% fail on
Steering
-
1.4% fail on
Steering system
- 1.4% fail on Track rod end
-
1.4% fail on
Steering system
-
1.4% fail on
Brakes
-
1.4% fail on
Hub components
- 1.4% fail on Brake pads
-
1.4% fail on
Hub components
-
1.4% fail on
Seat Belts and Supplementary Restraint Systems
-
1.4% fail on
Seat belts
- 1.4% fail on Attachment
-
1.4% fail on
Seat belts