MOT Results

Honest John Good Garage Guide MOT Results » Peugeot » Bipper Tepee » 2012

Peugeot Bipper Tepee MOT Results

Registered in 2012
69.1% pass rate
from 181 tests in 2020
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Peugeot Bipper Tepee is unusually good or bad.

  • 12% fail on Suspension (78% worse than other 2012 cars)
    • 9.9% fail on Springs (2 times worse than other 2012 cars)
      • 9.9% fail on Coil springs (2 times worse than other 2012 cars)
        • 9.9% fail on Coil spring (2 times worse than other 2012 cars)
    • 1.7% fail on Anti-roll bars
      • 0.55% fail on Linkage
      • 0.55% fail on Linkage ball joints
      • 0.55% fail on Ball joint dust cover
    • 1.1% fail on Shock absorbers
    • 0.55% fail on Macpherson strut
      • 0.55% fail on Attachment bracket and mounting
  • 7.7% fail on Lamps, reflectors and electrical equipment
    • 2.2% fail on Direction indicators
      • 2.2% fail on Flashing type
        • 2.2% fail on Individual direction indicators
    • 1.7% fail on Headlamp aim
      • 1.7% fail on Headlamp aim
    • 1.1% fail on Stop lamp
    • 1.1% fail on Registration plate lamp(s)
    • 1.1% fail on Electrical equipment
      • 0.55% fail on Battery(ies)
      • 0.55% fail on Horn
    • 0.55% fail on Position lamps
      • 0.55% fail on Position lamp
    • 0.55% fail on Reversing lamps
      • 0.55% fail on Reversing lamps
  • 3.3% fail on Visibility
    • 2.2% fail on Washers
    • 1.1% fail on Wipers
  • 3.3% fail on Body, chassis, structure
    • 1.1% fail on Fuel system (8 times worse than other 2012 cars)
      • 0.55% fail on Fuel cap/sealing device
      • 0.55% fail on System
    • 1.1% fail on Doors (10 times worse than other 2012 cars)
      • 0.55% fail on Driver's door
        • 0.55% fail on Door condition
      • 0.55% fail on Front passenger's door
        • 0.55% fail on Door condition
    • 0.55% fail on Spare wheel
      • 0.55% fail on Spare wheel condition
    • 0.55% fail on Seats
      • 0.55% fail on Passenger's seat
  • 3.3% fail on Noise, emissions and leaks
    • 2.8% fail on Exhaust emissions
      • 2.2% fail on Compression ignition (3 times worse than other 2012 cars)
        • 1.1% fail on On or after 01/07/2008
        • 0.55% fail on Pre 01/07/2008 Turbo
        • 0.55% fail on Malfunction indicator lamp
      • 0.55% fail on Spark ignition
        • 0.55% fail on Malfunction indicator lamp
    • 0.55% fail on Fluid leaks
      • 0.55% fail on Other leaks
  • 3.3% fail on Tyres
    • 2.2% fail on Condition
    • 1.1% fail on Tread depth
  • 2.8% fail on Brakes
    • 1.7% fail on Mechanical brake components
      • 1.1% fail on Brake linings and pads
        • 1.1% fail on Brake pads
      • 0.55% fail on Brake discs and drums
        • 0.55% fail on Brake discs
    • 0.55% fail on Parking brake control
      • 0.55% fail on Lever
    • 0.55% fail on Brake performance
      • 0.55% fail on Service brake performance
        • 0.55% fail on Rbt
          • 0.55% fail on Service brake performance
  • 2.2% fail on Steering
    • 1.7% fail on Steering linkage components
      • 1.7% fail on Track rod end
    • 0.55% fail on Steering gear
      • 0.55% fail on Operation
  • 0.55% fail on Seat belts and supplementary restraint systems
    • 0.55% fail on Seat belts
      • 0.55% fail on Condition

Search Good Garages