Peugeot 607 MOT Results

Registered in 2001
49.1% pass rate
from 55 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Peugeot 607 is unusually good or bad.

  • 22% fail on Brakes
    • 11% fail on Brake performance
      • 3.6% fail on Service brake performance
        • 3.6% fail on Rbt
          • 3.6% fail on Service brake performance
      • 3.6% fail on Service Brake Efficiency (sp)
        • 3.6% fail on Rbt (sp)
          • 1.8% fail on Service brake performance
          • 1.8% fail on Service brake imbalance
      • 1.8% fail on Brake performance not tested
      • 1.8% fail on Parking brake performance
        • 1.8% fail on Rbt
          • 1.8% fail on Parking brake performance
      • 1.8% fail on Parking brake efficiency (sp)
        • 1.8% fail on Rbt (sp)
    • 7.3% fail on ABS / EBS / ESC (3 times worse than other 2001 cars)
      • 7.3% fail on Electronic stability control (16 times worse than other 2001 cars)
    • 3.6% fail on Rigid brake pipes
    • 3.6% fail on Mechanical brake components
      • 3.6% fail on Brake discs and drums
        • 3.6% fail on Brake discs
    • 1.8% fail on Hydraulic systems
      • 1.8% fail on Servos
    • 1.8% fail on Flexible brake hoses
  • 22% fail on Lamps, reflectors and electrical equipment
    • 9.1% fail on Headlamps
      • 5.5% fail on Headlamp
      • 3.6% fail on Headlamp levelling device (8 times worse than other 2001 cars)
    • 7.3% fail on Headlamp aim
      • 7.3% fail on Headlamp aim
    • 3.6% fail on Direction indicators
      • 3.6% fail on Flashing type
        • 3.6% fail on Side repeaters
    • 1.8% fail on Stop lamp
    • 1.8% fail on Front and rear fog lamps
      • 1.8% fail on Rear fog lamp
        • 1.8% fail on Rear fog lamp
  • 16% fail on Suspension
    • 9.1% fail on Anti-roll bars
      • 5.5% fail on Linkage ball joints
      • 1.8% fail on Anti-roll bar
      • 1.8% fail on Linkage ball joint dust cover
    • 3.6% fail on Suspension arms
      • 3.6% fail on Ball joint
    • 1.8% fail on Shock absorbers
    • 1.8% fail on Sub-frames
      • 1.8% fail on Sub-frame
    • 1.8% fail on Other suspension component
      • 1.8% fail on Ball joint
  • 11% fail on Visibility
    • 5.5% fail on Wipers
    • 5.5% fail on Washers
  • 7.3% fail on Steering
    • 5.5% fail on Steering linkage components
      • 5.5% fail on Track rod end
    • 1.8% fail on Steering wheel
  • 7.3% fail on Tyres
    • 5.5% fail on Tread depth
    • 1.8% fail on Condition
  • 5.5% fail on Noise, emissions and leaks
    • 5.5% fail on Exhaust emissions
      • 3.6% fail on Spark ignition
        • 1.8% fail on Malfunction indicator lamp
        • 1.8% fail on Emissions not tested
      • 1.8% fail on Compression ignition
        • 1.8% fail on Pre 01/07/2008 Turbo
  • 3.6% fail on Body, chassis, structure
    • 1.8% fail on Exhaust system
    • 1.8% fail on Transmission
      • 1.8% fail on Drive shafts
        • 1.8% fail on Joints
  • 1.8% fail on Seat belts and supplementary restraint systems
    • 1.8% fail on SRS malfunction indicator lamp

Search Good Garages