Mitsubishi Galant MOT Results

Registered in 2003

53.6% pass rate

from 28 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2003 cars and highlighted areas where the Mitsubishi Galant is unusually good or bad.

29% fail on Brakes
- 14% fail on Brake performance
  - 14% fail on Service brake performance (3 times worse than other 2003 cars)
    - 14% fail on Rbt (3 times worse than other 2003 cars)
      - 11% fail on Service brake performance (3 times worse than other 2003 cars)
      - 3.6% fail on Service brake imbalance
  - 3.6% fail on Service Brake Efficiency (sp)
    - 3.6% fail on Rbt (sp)
      - 3.6% fail on Service brake imbalance
- 7.1% fail on Rigid brake pipes
- 3.6% fail on Parking brake control
  - 3.6% fail on Lever
- 3.6% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 3.6% fail on Hydraulic brake callipers
18% fail on Suspension
- 7.1% fail on Springs
  - 7.1% fail on Coil springs
    - 7.1% fail on Coil spring
- 7.1% fail on Component mounting prescribed areas
- 3.6% fail on Suspension arms
  - 3.6% fail on Pins and bushes
- 3.6% fail on Sub-frames
  - 3.6% fail on Sub-frame
7.1% fail on Steering
- 7.1% fail on Steering linkage components
  - 3.6% fail on Track rod end
  - 3.6% fail on Locking devices
7.1% fail on Visibility
- 7.1% fail on Wipers
7.1% fail on Lamps, reflectors and electrical equipment
- 3.6% fail on Registration plate lamp(s)
- 3.6% fail on Electrical equipment
  - 3.6% fail on Battery(ies)
7.1% fail on Seat belts and supplementary restraint systems
- 7.1% fail on Seat belts
  - 7.1% fail on Prescribed areas (5 times worse than other 2003 cars)
7.1% fail on Noise, emissions and leaks
- 7.1% fail on Exhaust emissions
  - 7.1% fail on Spark ignition
    - 7.1% fail on Malfunction indicator lamp
    - 3.6% fail on Catalyst emissions
7.1% fail on Tyres
- 7.1% fail on Tread depth
3.6% fail on Body, chassis, structure
- 3.6% fail on Transmission
  - 3.6% fail on Drive shafts
    - 3.6% fail on Joints