MINI Clubman MOT Results
Registered in 198063.0% pass rate
from 119 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1980 cars and highlighted areas where the MINI Clubman is unusually good or bad.
-
18% fail on
Lamps, Reflectors and Electrical Equipment
-
5.9% fail on
Position lamps
- 4.2% fail on Front lamps
- 3.4% fail on Rear lamps
-
5.9% fail on
Hazard warning
(2 times worse than other 1980 cars)
- 4.2% fail on Lamp (2 times worse than other 1980 cars)
- 1.7% fail on Switch
- 5.0% fail on Horn
- 4.2% fail on Registration plate lamp
-
4.2% fail on
Rear fog lamp
- 4.2% fail on Fog lamp
- 0.84% fail on Tell tale
-
4.2% fail on
Headlamps
- 3.4% fail on Headlamp
-
0.84% fail on
Headlamp defects which don't require an aim check on retest
- 0.84% fail on Main beam 'tell-tale'
-
0.84% fail on
Headlamp defects which do require an aim check on retest
- 0.84% fail on Main beam 'tell-tale'
- 4.2% fail on Headlamp aim
-
3.4% fail on
Direction indicators
-
3.4% fail on
Flashing type
- 1.7% fail on All direction indicators
- 1.7% fail on Tell tales
- 0.84% fail on Individual lamps
-
3.4% fail on
Flashing type
- 1.7% fail on Stop lamp
- 0.84% fail on Headlamp aim not tested
-
5.9% fail on
Position lamps
-
17% fail on
Suspension
(96% worse than other 1980 cars)
-
8.4% fail on
Drive shafts
(7 times worse than other 1980 cars)
-
8.4% fail on
Front drive shafts
(8 times worse than other 1980 cars)
- 8.4% fail on Constant velocity joints (8 times worse than other 1980 cars)
-
8.4% fail on
Front drive shafts
(8 times worse than other 1980 cars)
-
5.9% fail on
Prescribed areas
- 4.2% fail on Subframe mounting (5 times worse than other 1980 cars)
- 2.5% fail on Component mounting
-
4.2% fail on
Suspension arms
(3 times worse than other 1980 cars)
- 4.2% fail on Pins/bushes/ball joints (4 times worse than other 1980 cars)
-
3.4% fail on
Wheel bearings
- 2.5% fail on Front
- 0.84% fail on Rear
-
2.5% fail on
Radius arms
(10 times worse than other 1980 cars)
- 2.5% fail on Pins/bushes/ball joints (14 times worse than other 1980 cars)
-
1.7% fail on
Sub-frames
- 1.7% fail on Attachment (7 times worse than other 1980 cars)
- 0.84% fail on General condition
- 0.84% fail on Front suspension joints
-
8.4% fail on
Drive shafts
(7 times worse than other 1980 cars)
-
16% fail on
Brakes
-
15% fail on
Brake performance
- 8.4% fail on Front wheels
- 8.4% fail on Rear wheels
- 5.0% fail on Parking brake performance
- 3.4% fail on Service brake performance
-
1.7% fail on
Service brake control components
-
1.7% fail on
Pedal
- 1.7% fail on Anti-slip (5 times worse than other 1980 cars)
-
1.7% fail on
Pedal
-
0.84% fail on
Hydraulic systems
- 0.84% fail on Operation
-
15% fail on
Brake performance
-
13% fail on
Exhaust, Fuel and Emissions
- 9.2% fail on Emissions
-
2.5% fail on
Fuel system
- 1.7% fail on Pipe (5 times worse than other 1980 cars)
- 0.84% fail on Cap
- 1.7% fail on Exhaust system
- 0.84% fail on Emissions not tested
-
8.4% fail on
Driver's view of the road
- 5.0% fail on Wipers
- 3.4% fail on Washers
- 1.7% fail on Mirrors
-
7.6% fail on
Steering
-
4.2% fail on
Steering system
- 1.7% fail on Steering rack
- 1.7% fail on Track rod end
-
0.84% fail on
Free play
- 0.84% fail on Steering rack
-
3.4% fail on
Steering control
(5 times worse than other 1980 cars)
- 1.7% fail on Steering column (5 times worse than other 1980 cars)
-
1.7% fail on
Steering coupling
(11 times worse than other 1980 cars)
- 1.7% fail on Universal joint (13 times worse than other 1980 cars)
- 0.84% fail on Steering operation
-
4.2% fail on
Steering system
-
6.7% fail on
Body, Structure and General Items
-
2.5% fail on
Vehicle structure
- 2.5% fail on Chassis
-
2.5% fail on
Seats
- 2.5% fail on Drivers
- 1.7% fail on Passengers
- 0.84% fail on Body condition
-
0.84% fail on
Doors
- 0.84% fail on Passengers front
-
2.5% fail on
Vehicle structure
-
4.2% fail on
Tyres
- 2.5% fail on Tread depth
- 1.7% fail on Condition
-
2.5% fail on
Seat Belts and Supplementary Restraint Systems
-
2.5% fail on
Seat belts
- 1.7% fail on Prescribed areas
- 0.84% fail on Requirements
-
2.5% fail on
Seat belts
-
0.84% fail on
Registration plates and VIN
- 0.84% fail on Registration plate